Previous page Activating Suprema 2 integration module  Configuring the Suprema 2 controller Next page


To configure the Suprema 2 head object, do the following:

  1. Go to the settings panel of the Suprema Biometrical ACS v2 object, created on the basis of the Computer object on the Hardware tab of the System settings dialog window.

  2. Click the Write users button (1) to write users to all controllers.
  3. Click the Set Time button (2) to synchronize the time of all controllers with the computer time.
  4. Set the timeout in the ms keep-alive timeout field (3). The default value is 30000 ms.
  5. Set the Dynamic checkbox (4) for dynamic recording of the users access settings.
  6. To email QR codes, set the following parameters:
    1. In the SMTP Server field (5), enter the SMTP Server address of the outgoing mail;
    2. In the SMTP Port field (6), enter the port number used by the outgoing mail server;
    3. In the User Name field (7), enter the name of the account used to send messages on the outgoing mail server;
    4. In the Password field (8), enter the password of the account on the outgoing mail server;
    5. In the Mailing Address field (9), enter the email address from which the messages will be sent.
      If you don't need to send QR codes, you can skip this step.

  7. Click the Apply button (10) to save the changes. 

  • No labels