Documentation for Auto Intellect 5.5. Documentation for other versions of Intellect is available too.

Previous page Viewing the data about passing vehicle  Viewing the identified vehicles protocol Next page


The last identified vehicle data is displayed in the Last event group of the Online monitor window (left area of this window).

Note

If there is an event selected in the identified vehicles protocol or in the alarms protocol, the data about this event will be displayed in the Last event group (see Viewing the protocol of the identified vehicles, Viewing the alarms protocol).

Viewing the data about the last identified vehicle is performed in the following way:

  1. The vehicle video frame with a caption is displayed in the filed (1).

  2. The identified LP number and the LP image is displayed in the field (2).

    Note

    If the LP number hasn't been recognized, UNDEFINED message will be displayed in the field.

  3. Depending on the available data, the following information can be displayed in the box (3):
    1. In the Recognizer field, the name of the LP recognizer is displayed (the name of the corresponding LPR channel object).

    2. In the Country field, the country to which belongs the identified LP number is displayed.

      Note

      This field is only displayed when the IntelliVision LPR module is used for recognition.

    3. In the Recognition time field, the date and time of receiving the vehicle information is displayed.

    4. In the Speed field, the vehicle speed is displayed.

      Note

      In case the Uragan or CARMEN-Auto modules are used for identification, and the Radar module is not connected, zero speed value is displayed.

      Note

      Depending on the Vehicle Tracer settings, the speed is displayed in km/h or mi/h (see Auto-Intellect software package: Administrator's guide).

    5. In the Speed limit field, the speed limit allowed on this part of the road is displayed.

    6. In the Speeding field, the difference between the captured vehicle speed and the speed limit allowed on this part of the road is displayed.

      Note

      This field is displayed if the speeding event was registered, otherwise this field is absent.

    7. In the Validity field, the identification validity rate is displayed in percent.
    8. In the Direction field, the vehicle's direction is displayed (Towards the camera, Off the camera or Undefined).

    9. In the Regional code field, the regional code of the recognized LP is displayed.

      Note

      This field can be hidden (see Setting up the Vehicle Tracer interface window).

    10. In the Camera field, the name of the video camera which captured the vehicle, is displayed.
    11. In the Address field, the camera location address is displayed.
    12. In the Identificator (№) field, the camera ID number is displayed.
    13. In the Sertificate (№) field, the certificate number is displayed.

    14. In the Calibration field, the calibration expiration date is displayed.

    15. In the Type field, the vehicle type is displayed.

      Note

      This field is displayed only if the Vehicle type recognition module is used.

    16. In the Dangerous goods class and Dangerous goods composition fields, the class and the contents of the dangerous cargo are displayed correspondingly.

      Note

      These fields are displayed only if the CARMEN-Auto module and the Hazard Identification Number Recognition Engine (ADR) are used.

Viewing the data about the last identified vehicle is complete.

Note

In case an alarm was registered for a vehicle, the reason of alarm is also displayed in the Last event group.

Note

The data about any event selected in the identified vehicles protocol or in the alarm protocol can be viewed in the same way (see Viewing the identified vehicles protocol, Viewing the alarms protocol).


  • No labels