Documentation for Monitoring PSIM 1.0 (english)

Previous page Configuration for associating events with certain alarm groups  Changing the description of short alarms and long alarm Object disarmed Next page

If the transmission of user alarms (see Configuration for associating events with certain alarm groups section) to the Server of Control is configured, then video data can be added to these alarms. The video data transmission configurations can be created in Monitoring PSIM software in order to be added to any events when configuring alarm groups.

Important!

If video data (snapshots or videos) is added to an alarm, then the script for stopping camera recording is to be created (see Sample script for stopping camera recording section).

Set up the configurations for transferred video data as follows:

  1. Go to the settings panel of the Partition Of Control object. 
  2. Click the Video data… button. The Adding/Removing configurations for transferred video data box appears.
  3. To add a new video data transmission configuration click the Add… button. The configuration settings box appears.
  4. From the Assignment to camera drop-down list (1) select the Camera object that will be used for getting video data.
  5. Configure the data transmission parameters (2). The data transmission parameters are the same as those for video data transmitted along with sensor alarms (see Configuring sensors section, steps 7-15).
  6. Click the OK button (3). The created configuration is added to the list.
  7. Click the Apply button.

Setting up the configurations for transferred video data is complete.

  • No labels