Documentation for Axxon One 2.0. Documentation for other versions of Axxon One is available too.

Previous page Embedded vehicle speed measurement radar  Face detection and temperature control with Mobotix M16 TR cameras Next page

For a number of thermal cameras, Axxon One supports an embedded temperature detector (see Documentation Drivers Pack (en), body temperature detection). This detector detects a person's face and its temperature in the video image.

In general, to configure the temperature detector, do the following:

  1. Create a detector (see Configuring detectors and their sub-detectors).

  2. Refer to the official documentation for the camera to configure the detector in Axxon One.

    Attention!

    In general, you must specify a temperature threshold for all cameras. If the threshold is exceeded, the detector generates an event.

    You must also configure a black body (similar to Face detector and temperature control, see Configuring Face detector and temperature control).

  3. If necessary, configure macros to initiate certain actions in the system when the detector generates an event (see Programming).

Some cameras display a bounding box of a person's face and its temperature on the video image. This feature is enabled in the web interface of a particular camera.

  • No labels