Page History

...

1. Set the Operator protocol interface box coordinates in one of the following ways.
   Image Modified
   
   1. Manually:
      1. Set the X (horizontally indented from screen’s left border) and Y (vertically indented from screen’s upper border) coordinates of the upper left corner of the Operator protocol interface box. Coordinates are set as a percentage of the corresponding screen dimensions horizontally and vertically as follows (1).  
      2. Set the dimensions of the Operator protocol interface box: window’s width «W» and window’s height «H». Dimensions are set as a percentage of the corresponding screen dimensions horizontally and vertically as follows (2). 
   2. With a test window:
      1. Click X (3).
      2. Position the Set dimensions test window where the Operator protocol window should be displayed.
         Image Modified
      3. Click OK. As a result, the coordinates in the fields X, Y, W, H will be set in accordance with the size and position of the test window.
2. Set the Allow moving checkbox if the position and size of the Operator protocol interface box are to be changed manually (4). 
3. In the Monitor dropdown list, select the the system ID system ID of a monitor for which the coordinates are set and on which the Operator protocol  interface interface box is to be displayed (5). 
4. Click Apply (6).

...