Page History

...

1. Standard. The following objects can be classified: a human, a vehicle, an other object (see Cross line detector configuration and Motion in the Area detector configuration).
2. Advanced. The following objects can be classified: a human, a group of humans, a vehicle, noise, an object carried into the area, an object carried out of the area, an other object (see the CAM_VMDA_DETECTOR section of the Programming Guide).
3. Neural filter — a neural network-based classification. Any objects can be classified to a high precision. The neural network is trained individually for each use case.

...

1. Install the Detector Pack subsystem (if not already installed). The Detector Pack subsystem installation guide is available in the corresponding documentation section, the most current version of the documentation is in the AxxonSoft documentation repository.
2. For the the VMDAEXT key, specify the 1 value (for details on the key, see Registry keys reference guide).
3. For the the VMDAEXT.RAM key, specify the value greater than 2000 but less than 5000. It is recommended to specify 4000, depending on the computer hardware resources.
4. Go to the Basic settings tab on the Tracker object settings panel and make sure that the Sensitivity slider is in the leftmost position (i.e. auto mode is on).
   
5. On the Tracker object settings panel, open the Neurofilter tab (1).
   
6. Set the Use neurofiltering (2) checkbox.
7. In the Tracking model field (3), enter the full path to the tracker model file received from the AxxonSoft technical support, or click the ... button and select the file in the standard Windows dialog box.
8. In the Tracking device name field (4), enter the name of the device that should be used by the tracker for the objects classification:
   1. CPU — use the CPU.

   2. GPU0, GPU1, GPU2 ... — use the NVIDIA GPU. Usually GPUs are recognized in the system in the order of their physical installation: the first (usually the upper one) GPU is number 0, the middle one is number 1, and the last (usually the lower one) is number 2.

      Info
      title Note
      If there are NVIDIA GPUs in the system, it is recommended to use them. If there are no NVIDIA GPUs in the system, th CPU resources should be used. GPUs from other manufacturers are not supported.

      
      

      Info
      title Note
      In the 64-bit version of Intellect (Intellect64.exe), the the tracking device name is selected from the drop-down list of the processors and GPUs available on the computer.

      
      

9. In the Unattended objects model field (5), enter the full path to the abandoned objects detection model file received from the AxxonSoft technical support, or click the ... button and select the file in the standard Windows dialog box.

10. In the Unattended objects device name field (6), enter the name of the device that should be used by the tracker for the abandoned objects classification.

    Info
    title Note
    For the unattended objects neural filter operation, it is necessary that the unattended objects detector of the Tracker object is enabled, and the VMDA detectors are configured appropriately (see Creating and Configuring the Tracker Object and Creating and Configuring VMDA Detection).

    
    

    Info
    title Note
    In the 64-bit version of Intellect (Intellect64.exe), the unattended objects device name is selected from the drop-down list of the processors and GPUs available on the computer.

    
    

11. Click the Apply button (7).

    Note
    title Attention!
    Each tracker with configured neural filter uses about 900 MB of video memory. If you are using several neurotrackers which in total consume more video memory than is available in the system, an error will occur. In cases when there is not enough video memory, it is recommended to use several video cards in one system.

    
    

...