Page History

The Dahua terminal connection is configured as follows:

...

To configure the Dahua access controller, do the following:

1. Go to the settings panel of the Dahua ASA6214FAccess Controller object , which that is created based on the basis of the Dahua parent object.
   Image RemovedImage Added
   
2. In the IP (1) address, Mask, Gateway and Port (2) fieldsfield, enter the IP address, mask, gateway and port of the Dahua terminal/controller, respectively.
   Image Added
3. In the Login (3) and Password (4) fields and Password fields, enter the login and password to connect to the terminal/controller.
4. Set the Temperature/Mask events checkbox (5) the “Quarantine” mode checkbox, if it is necessary to display the events with the body temperature and the face mask presence/absence in the Event viewer of a mask on the user's face in the Event Viewer interface object.
   Image Added
   
5. Click Apply (6) to save the settings.

...

1. Set the Dynamic access settings update checkbox to enable the dynamic data transfer from the Access Manager to the Dahua controller/terminal. In this case, when user data or access levels are changed, all changes will be automatically sent to the Dahua controller/terminal.
2. Click the Set time button to set the current time of the Server on the Dahua controller/terminal.
   Image Added
   

3. Click the Write access settings button to write the data of the Access Manager module to the Dahua controller/terminal.

4. Click the Clear access log button to clear the events database.
5. Click the Clear alarm log button to clear the alarms database.
6. To update the data on the Dahua controller/terminal (for example, a failed device has been replaced), click the Update information Image Added button. The information will be updated if the new Dahua device has the same IP address and connection login/password.
7. Click the Apply Image Added button to save the changes.