Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info
titleNote

설치 중에 방화벽을 비활성화하면 다른 문제가 발생할 수 있습니다No signal from video cameras and failure to connect to other servers 참조

Anchor
ErrorInstallingDP
ErrorInstallingDP
드라이버 팩 설치 오류

어떤 경우에는 드라이버 팩을 설치하는 동안 오류가 발생할 수 있습니다.

No Format
Universal C Runtime이 설치되지 않았기 때문에 설치에 실패했습니다. Windows Update를 실행하고 필요한 모든 Windows 업데이트(KB2999226)를 설치하세요. 여기에서 UCRT를 별도로 다운로드할 수 있습니다: 'https://support.microsoft.com/en-us/kb/2999226'.

이 문제는 Windows 업데이트 KB2999226을 설치하면 해결될 수 있습니다.

Window 10 OS 설치 오류

Windows 10.0.17763 이상에 Axxon One 설치하면 복구 아카이브 만들기 오류 메시지가 표시될 수 있습니다.

오류를 해결하려면 다음과 같이 하세요.

  1. 제어판 → 시계 및 지역 → 지역 → 관리자 권한 탭 → 시스템 로캘 변경으로 이동합니다.
  2. 베타: 전 세계 언어 지원을 위해 유니코드 UTF-8 사용 체크박스를 선택 해제합니다.
  3. Axxon One 다시 설치합니다.

Windows 11 OS 및 Windows Server 2019 OS 의 서버 오류 

Windows 11 OS 및 Windows Server 2019 OS 에서 Guardant 드라이버가 설치되면 서버 작업에서 오류가 발생할 수 있습니다. Guardant 드라이버를 설치하지 않는 것이 좋습니다. Guardant 드라이버 설치는 기본적으로 비활성화되어 있습니다.

Guardant 드라이버를 올바르게 설치하려면 운영 체제 에서 드라이버 디지털 서명 확인을 비활성화 하고, BIOS에서 보안 부팅을 비활성화해야 합니다.

Guardant 드라이버 호환성 문제

...

Axxon One 설치할 때 Guardant 드라이버 호환성 문제가 발생할 수 있습니다(grdkey.sys

...

 또는 grdusb.sys

...

 파일 오류).

To fix the error, do as follows:

오류를 해결하려면 다음과 같이 하세요.

  1. 메모리 무결성 비활성화:
    1. Windows 보안 센터  장치 보안을 엽니다.
    2. 코어 격리 섹션에서 코어 격리 정보 링크를 클릭합니다.
    3. 메모리 무결성 스위치를 비활성화 위치로 설정합니다.
      Image Added
    4. 이러한 단계를 완료한 후 컴퓨터를 다시 시작하여 변경 사항을 적용하세요.
  2. Device Guard 비활성화:
    1. 명령줄을 사용하여 gpedit.msc 명령을 실행하여 로컬 그룹 정책 편집기를 시작합니다.
    2. 컴퓨터 구성  관리 템플릿  시스템  Device Guard 로 이동한 후 오른쪽에서 가상화 기반 보안 사용을 선택합니다.
  3. 이러한 옵션을 비활성화한 후 컴퓨터를 재시작하고 현재 버전의 Guardant 드라이버를 다시 설치하세요
  4. Disable Memory integrity:
    1. Open Windows Security CenterDevice security.
    2. In the Core isolation section, click the Core isolation information link.
    3. Set the Memory integrity switch to the inactive position.
      Image Removed
    4. After you complete these steps, restart your computer to apply the changes.
  5. Disable Device Guard:
    1. Using the command line, run the gpedit.msc command to launch the Local Group Policy Editor.
    2. Go to Computer ConfigurationAdministrative TemplatesSystemDevice Guard → select Enable virtualization-based security on the right.
  6. After you disable these options, restart your computer and reinstall the current version of Guardant drivers.
Note
titleAttention!

If you use modern Guardant keys 최신 Guardant 키(Sign/Sign Net/Time/Code), you can contact the developer of the protected application and request to switch the key to driverless mode (see the official Guardant documentation). In this case, it will not be necessary to install the Guardant Driver on your computer to work with the key.

An error occurred when installing on Windows with the language pack Norsk (bokmål)

Installing the Axxon One Server on Windows with the language pack Norsk (bokmål) is not possible due to incompatibility with PostgreSQL.

You must install Norsk Language Pack (nynorsk).

Error uninstalling Axxon One on systems with Videoinspector installed

In some cases, uninstalling Axxon One may be impossible if Videoinspector is used.

...

를 사용하는 경우 보호된 애플리케이션 개발자에게 연락하여 키를 드라이버리스 모드로 전환하도록 요청할 수 있습니다 (공식 Guardant 문서 참고). 이 경우 키로 작업하기 위해 컴퓨터에 Guardant Driver를 설치할 필요가 없습니다.


Windows 에 언어팩 Norsk (bokmål)을 설치하는 동안 오류

PostgreSQL과 호환되지 않기 때문에 Windows에 Norsk(복말) 언어 팩을 사용하여 Axxon One Server를 설치하는 것은 불가능합니다.

Norsk 언어 팩(Nynorsk)을 설치해야 합니다.

Videoinspector가 설치된 시스템에서 Axxon One을 제거하는 중 오류

어떤 경우에는 Videoinspector를 사용할 경우 Axxon One을 제거하는 것이 불가능할 수 있습니다 .

Axxon One 올바르게 제거하려면 먼저 Videoinspector를 제거하세요

...

.