Page History

...

General information about working with the DEA Security FUSION P2P integration module

The DEA FUSION P2P integration module is managed through the Map, Equipment Board, and Event Board interface objects, along with Programming rules.

...

For the information on configuring Programming rules, see Creating and configuring macros and counters Programming.

Managing the DEA FUSION P2Pobjects

States

States available for various DEA FUSION P2P objects are listed in the tables below.

1. Line object.
   

   Icon	State
   Image Modified	Alarm
   Image Modified	Breaking through
   Image Modified	Climbing
   Image Modified	Continuous impact
   Image Modified	Wire cut
   Image Modified	Memory fail
   Image Modified	Sporadic cut
   Image Modified	Disabled
   Image Modified	Fail
   Image Modified	Invalid
   Image Modified	Link lost
   Image Modified	Activated
   Image Modified	Deactivated
   Image Modified	Standby
   Image Modified	Normal
   Image Modified	Prealarm
   Image Modified	Tamper
   Image Modified	Tamper memory
   Image Modified	Unknown

2. Controller.

   Icon	State
   Image Modified	Disabled
   Image Modified	Error
   Image Modified	Link lost
   Image Modified	Link set
   Image Modified	Unknown

3. Link.
   

   Icon	State
   Image Modified	Lost
   Image Modified	Set

4. Input, Led, Output, Rooster, Button, Bulb, Contact.
   

   Name	Lost	Off	On
   Input	Image Modified	Image Modified	Image Modified
   Output	Image Modified	Image Modified	Image Modified
   Rooster	Image Modified	Image Modified	Image Modified
   Button	Image Modified	Image Modified	Image Modified
   Bulb	Image Modified	Image Modified	Image ModifiedImage Modified
   Contact	Image Modified	Image Modified	Image Modified
   Led	Image Modified	Image Modified	Image Modified

Commands

Commands accessible via Axxon One interface for various DEA FUSION P2P objects are listed below.

...

In order to change visualisation settings of the Input object, do the following:

1. Switch to the layout editing mode (see :  Switching to layout editing mode).
2. On the map, left-click the Input object.
3. Pick Select the desired required visualisation type from the list.