Page History

The settings panel of the SIP-terminal object is shown in the pictures belowfigure.

Table describes the setting parameters of the SIP-terminal settings panel system object.

№	Parameter	Method for setting the parameter value	Description

Presented as

Representation	Default value

Range of values

Value range
1

The

Identification number

field

Automatically

Shows

Displays the identification number of the

SIP-terminal system object

in the system.Sequence of numbers

Numbers, letters, periods, hyphen, dash and underscore

-

Depends on the number of the SIP-terminal objects in the system

.

2

The

Name

field

Enter the value

in

into the field

Assigns a

Sets the name

to

of the SIP-terminal object in the system

.

Latin, Cyrillic

letters

and service characters

SIP-terminal

A line

representing

containing a sequence of any

symbols

characters (letters, digits, service characters

apart from

except > and <

symbols

characters),

not

case-

sensitive

insensitive.

Number of

symbols –

characters—from 1 to 60

.

3

The

Disable

checkboxIs set with a

Set the checkbox

Shows

Sets the

status

state (enabled or disabled) of the SIP-terminal object in the system

.

Boolean type

-

Clear

Yes –

Set—the SIP-terminal object is disabled and

is not in use.No –

isn't used

Clear—the SIP-terminal object is enabled and

is in use.

used

4

The

Computer

dropdown list

Select the value from

Is selected in

the list

Assigns

Sets the Computer parent

Computer

object for the given SIP-terminal object

.

Name of the Computer objects

registered in the system

.

Name of the Computer parent

Computer

object

Depends on the number of the Computer objects in the system

.

5

The

Terminal type

switch

Set

switch to

the required

position

radio button

Sets the SIP-terminal type

Supported SIP-terminal types

SIP server

SIP server

— the

—the SIP-terminal acts as a server, any SIP-clients can be connected to it

SIP client

— the

—the SIP-terminal acts as a client, it can be connected to any SIP-server

The Basic settings tab.

Table describes the setting parameters of the the Basic settings tab.

№	Parameter	Method for setting the parameter value	Description	Presented asRepresentation	Default value	Range of valuesValue range
1	The Network drop-down list	Select the value from Is selected in the list	Sets the IP address of the network adapter that will be used to connect to the network where in which the SIP-clients are located.	IP - address	Default network adapter	The list of the available network adapters of the computer
2	The SIP port field	Enter the value in into the field	Sets the port number which will receive the data from the clients via the SIP -clientsprotocol	Sequence of numbersInteger	5060	0-–65535
3	The SIP transport drop-down list	Select the value from Is selected in the list	Sets the used transport level layer protocol to be used.	Supported transport level layer protocols	UDP	TCP UDP
4	The RTP ports range, from and to fields	Enter the value in into the field	Sets the RTP ports range	IntegerSequence of numbers	from : 40000 to : 64000	0-–65535
5	The Addressfield	Enter the value in into the field	For the SIP - client terminal type only. Sets the IP address of the SIP - server	IP - address	-	1.0.0.0 - –255.255.255.255
5	The Portfield	Enter the value in into the field	For the SIP - client terminal type only. Sets the port for the SIP - server connection	IntegerSequence of numbers	-	0-–65535

The Advanced settings tab.

Image Modified

Table describes the setting parameters of the the Advanced settings tab.

№	Parameter	Method for setting the parameter value	Description	Presented asRepresentation	Default value	Range of valuesValue range
1	The Subscriber field	Enter the value in into the field	Sets the SIP server special number	IntegerSequence of numbers	-	>=0
2	The Name field	Enter the value in into the field	Sets the name of the SIP server special number	Latin, Cyrillic letters and service characters	-	A line representing containing a sequence of any symbolscharacters

The Numbers settings tab.

Table describes the setting parameters of the the Numbers settings tab.

№	Parameter	Method for setting the parameter value	Description	Presented asRepresentation	Default value	Range of valuesValue range
1	The Subscribercolumn	Automatically	Lists Displays the numbers of all devices and operators registered on the SIP-terminal, as well as special numbers.	-	-	-
2	The Name field	Automatically	Lists Displays the names of the corresponding devices, operators, and special numbers.	-	-	-
3	The Redirecting field	Enter the value in into the field	Sets the number or numbers to which the corresponding subscriber's calls should be forwarded to.	IntegerSequence of numbers	-	Numbers of all devices and operators registered on the SIP-terminal, as well as special numbers. If you want to specify several numbers, use a semicolon as a separator, for example, 234;12;0983
4	The Pending, sec fields	Enter the value in into the field	Sets the time period in seconds, during which it is necessary to wait for a response from the subscriber.	IntegerSequence of numbers	-	>0
5	The One responder checkbox	Set the checkbox	Enables a group call (redirected forwarded to several numbers) ending after one of the recipients answers	Boolean type	NoClear	Yes – a Set—a group call is ended at for all recipients after the response of any operator or a device. No – the Clear—the group call is not ended after the answer of the first or subsequent operators and/or devices, i.e. all recipients can join the call.
6	The Run macro drop-down list	Select the value from Is selected in the list	Sets the Macro object which should be run when calling the subscribe.	Name of the Macro objects registered in the system.	-	Depends on the number of the Macro objects in the system.
7	The Calling number multicast multicast (video) field	Enter the value in into the field	Sets the IP address for broadcasting transmitting the video stream from the calling device in the multicast mode.	IP - address	-	1.0.0.0 - –255.255.255.255
8	The Calling number multicast multicast (audio) field	Enter the value in into the field	Sets the IP address for broadcasting transmitting the audio stream from the calling device in the multicast mode.	IP - address	-	1.0.0.0 - –255.255.255.255
9	The Destination number multicast multicast (video) field	Enter the value in into the field	Sets the IP address for broadcasting transmitting the video stream from the destination device in the multicast mode.	IP - address	-	1.0.0.0 - –255.255.255.255
10	The Destination number multicast multicast (audio) field	Enter the value in into the field	Sets the IP address for broadcasting transmitting the audio stream from the destination device in the multicast mode.	IP - address	-	1.0.0.0 - –255.255.255.255

Page tree

Versions Compared

Old Version 2

New Version Current

Key