Go to documentation repository
The settings panel of the SIP-terminal object is shown in the pictures below.
Table describes the parameters of the SIP-terminal settings panel.
№ | Parameter | Method for setting the parameter value | Description | Presented as | Default value | Range of values |
1 | The Identification number field | Automatically | Shows the identification number of the SIP-terminal object in the system. | Sequence of numbers | - | Depends on the number of the SIP-terminal objects in the system. |
2 | The Name field | Enter the value in the field | Assigns a name to the SIP-terminal object in the system. | Latin, Cyrillic letters and service characters | SIP-terminal | A line representing a sequence of any symbols (letters, digits, service characters apart from > and < symbols), not case-sensitive. Number of symbols – from 1 to 60. |
3 | The Disable checkbox | Is set with a checkbox | Shows the status (enabled or disabled) of the SIP-terminal object in the system. | Boolean type | - | Yes – the SIP-terminal object is disabled and is not in use. No – the SIP-terminal object is enabled and is in use. |
4 | The Computer dropdown list | Is selected in the list | Assigns the parent Computer object for the SIP-terminal object. | Name of the Computer objects registered in the system. | Name of the parent Computer object | Depends on the number of the Computer objects in the system. |
| 5 | The Terminal type switch | Set switch to the required position | Sets the SIP terminal type | Supported SIP terminal types | SIP server | SIP server — the SIP-terminal acts as a server, any SIP-clients can be connected to it SIP client — the SIP-terminal acts as a client, it can be connected to any SIP-server |
The Basic settings tab
Table describes the parameters of the Basic settings tab.
№ | Parameter | Method for setting the parameter value | Description | Presented as | Default value | Range of values |
| 1 | The Network drop-down list | Is selected in the list | Sets the IP address of the network adapter that will be used to connect to the network where the SIP-clients are located. | IP-address | Default network adapter | The list of available network adapters |
| 2 | The SIP port field | Enter the value in the field | Sets the port number which will receive the data from the SIP-clients | Integer | 5060 | 0-65535 |
| 3 | The SIP transport drop-down list | Is selected in the list | Sets the transport level protocol to be used. | Supported transport level protocols | UDP | TCP UDP |
| 4 | The RTP ports range, from and to fields | Enter the value in the field | Sets RTP ports range | Integer | from: 40000 to: 64000 | 0-65535 |
| 5 | The Address field | Enter the value in the field | For SIP-client terminal type only Sets the IP address of the SIP-server | IP-address | - | 1.0.0.0 - 255.255.255.255 |
| The Port field | Enter the value in the field | For SIP-client terminal type only Sets the port for the SIP-server connection | Integer | - | 0-65535 |
The Advanced settings tab
Table describes the parameters of the Advanced settings tab.
№ | Parameter | Method for setting the parameter value | Description | Presented as | Default value | Range of values |
| 1 | The Subscriber field | Enter the value in the field | Sets the SIP server special number | Integer | - | >=0 |
| 2 | The Name field | Enter the value in the field | Sets the name of the special number | Latin, Cyrillic letters and service characters | - | A line representing a sequence of any symbols |
The Numbers settings tab
Table describes the parameters of the Numbers settings tab.
№ | Parameter | Method for setting the parameter value | Description | Presented as | Default value | Range of values |
| 1 | The Subscriber column | Automatically | Lists the numbers of all devices and operators registered on the SIP-terminal, as well as special numbers. | - | - | - |
| 2 | The Name field | Automatically | Lists the names of the corresponding devices, operators, and special numbers. | - | - | - |
| 3 | The Redirecting field | Enter the value in the field | Sets the number to which the corresponding subscriber's calls should be forwarded to. | Integer | - | Numbers of all devices and operators registered on the SIP-terminal, as well as special numbers. |
| 4 | The Pending, sec field | Enter the value in the field | Sets the time period in seconds, during which it is necessary to wait for a response from the subscriber. | Integer | - | >0 |
| 5 | The One responder checkbox | Set the checkbox | Enables a group call (redirected to several numbers) ending after one of the recipients answers | Boolean type | No | Yes – a group call is ended at all recipients after the response of any operator or device. No – the group call is not ended after the answer of the first or subsequent operators and/or devices, i.e. all recipients can join the call. |
| 6 | The Run macro drop-down list | Is selected in the list | Sets the Macro object which should be run when calling the subscribe. | Name of the Macro objects registered in the system. | - | Depends on the number of the Macro objects in the system. |
| 7 | The Calling number multicast (video) field | Enter the value in the field | Sets the IP address for broadcasting the video stream from the calling device in the multicast mode. | IP-address | - | 1.0.0.0 - 255.255.255.255 |
| 8 | The Calling number multicast (audio) field | Enter the value in the field | Sets the IP address for broadcasting the audio stream from the calling device in the multicast mode. | IP-address | - | 1.0.0.0 - 255.255.255.255 |
| 9 | The Destination number multicast (video) field | Enter the value in the field | Sets the IP address for broadcasting the video stream from the destination device in the multicast mode. | IP-address | - | 1.0.0.0 - 255.255.255.255 |
| 10 | The Destination number multicast (audio) field | Enter the value in the field | Sets the IP address for broadcasting the audio stream from the destination device in the multicast mode. | IP-address | - | 1.0.0.0 - 255.255.255.255 |
Overview
Content Tools