Creating the Active tracking database

The Active tracking database is the Auto-Intellect software package database and is filled up by operator via the Vehicle Tracer module.

For total interaction between the Active tracking database and the Vehicle Tracing module the following conditions should be met:

1. The Active tracking database is connected to the Auto-Intellect software package as an external plates database.
2. This external database is used by Vehicle Tracer module for analyzing the identified plates.

Meeting the following conditions the interaction of the Active tracking database and Vehicle Tracer module is done in the following way:

1. Vehicle's plate is entered by operator to the Active tracking database via the Vehicle Tracer module, stating the reason.
2. The Vehicle Tracer module compares the plate of a passing vehicle with plates, stored at the Active tracking database. In case, if the correspondence of the identified plate and the plate, stored at the Active tracking database is set up, alarm is generated.

Active tracking option is convenient to be used in the Auto-Intellect distributed system, as it enables the operator at his workstation to notify the remote workstation operators about the vehicle that is to be captured.

Editing the data about the vehicle in the Active tracking database is done in the following way:

1. Click the External Plates Database in the main menu of the Event search in the Recognizers DBs window.
   
2. As a result Internal SVDBs dialog window will open.
   
3. Click Enter to add records to the database.
4. Enter the vehicle plate in the License plate number: field (1).
   
5. If the fact of vehicle driving to the vehicle report by all boundaries is to be checked, do the following:
   1. Set the Check the fact of driving checkbox (2).
   2. Enter the time period using the up-down buttons and select the measuring unit from the drop-down list (3).
6. Enter the description of reason by which the vehicle report is created in the Additional information field (4).

7. Click Save to save changes (5).

   Note.

   Click Cancel to cancel changes (6).

   Note.

   Entered vehicle reports are added to the database with the Active status.

8. Go to the All reports of vehicles found in DB tab to change the status of vehicle report.
   
   
9.  The list of vehicle reports in database is displayed in the table (1):
   9.1 Plates of vehicles are wanted are specified in the License plate column.
   9.2 Time of adding the vehicle report to the database is specified in the Date and Time column.
   9.3 Operator who has added the vehicle report to the database is specified in the Operator column.
   9.4 The reason by which the vehicle report is created is specified in the Comment» column.
   9.5 Checkboxes are set on the active svehicle reports while viewing in the Active column.
10. Enter the part of the sought-for vehicle in the License plate: field and click Search to search vehicle in the table (2). Records corresponding to the request parameters will be highlighted red in the table.
11. Set checkboxes opposite those svehicle reports which are active and uncheck checkboxes opposite those reports which are inactive in the Active column to change the reports status (4).
12. Click Edit to edit the selected vehicle report (5).
13. Click Delete to remove the selected vehicle report (6).
14. Click Refresh to refresh the list of vehicle reports (7).
15. Click Save to save changes (8).

Adding the vehicle data to the External Plates Database is completed.