Go to documentation repository
Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.
Previous page Next page
Contents
Intellect base
| XML file | Parameter | Available values | Default | Product version | Parameter in effect |
|---|---|---|---|---|---|
| <Archive storage drive>:\VIDEO\Settings.xml | RotateAngle | 0, 90, 180, 270 | 0 | Sets the rotation angle of video image in the archive. If the rotation angle is specified in the video camera settings (see Configuring a rotation angle of video image), then this parameter is set automatically in Settings.xml file. In Axxon player the archive is rotated at the specified angle when being played back or exported. | |
| C:\ProgramData\elasticsearch-2.0.1\config\elasticsearch.yml | http.port | 0 - 65536 | 9200 | up to Intellect 4.10.2 | The parameter sets the port occupied by Elastic Search search engine. The value is to be the same as one specified in the cam_title.run.config file (see below). |
| C:\ProgramData\elasticsearch-5.2.2\config\elasticsearch.yml | Intellect 4.10.3 and later | ||||
| <Intellect instalation>\Modules\cam_title.run.config | ElasticSearchPort | 0 - 65536 | 9200 | The parameter sets the port Intellect sends data for Elastic Search search engine to. The value is to be the same as one specified in the elasticsearch.yml file (see above). | |
| <Intellect instalation>\SlaveSettings.xml | DNS | - | - | - | This file stores the addresses of DNS servers specified using the Advanced Setup utility (see The Settings panel of the DNS section). |
Intellect Web Report System
| XML file | Parameter | Available values | Default | Product version | Parameter in effect |
|---|---|---|---|---|---|
| <Directory of the Intellect software installation>\Modules\Wt2\Web.config | CamMonitorShift | -5000 - 5000 | 0 | Sets shifting of video start while report viewing in milliseconds: >0 – video will start later than time specified in a report <0 – video will start earlier than time specified in a report | |
| FaceReplaceCameraIpFrom | IP-address | - | up to 3.2 | Changes internal IP-address of a Server specified in the Architecture while viewing video for POS reports and for "Face" module report from outside | |
| FaceReplaceCameraIpTo | IP-address | - | up to 3.2 | Changes external IP-address of a Server specified in the Architecture while viewing video for POS reports and for "Face" module report from outside | |
| WorkThroughGateway | true, false | false | from 3.3 | Enables receiving video from Gateway while viewing video for POS reports and for "Face" module report. A Gateway is selected authomatically. | |
| CommandTimeout | Time in seconds | 200 | Enables setting the timeout in seconds, during which waiting for data retrieval and report generation should occur. | ||
| PersonNameLength | >=0 | - | 3.4 | By default, the parameter is not added to the file (corresponds to value 1). Add it to the <appSettings> section in the following format: <add key = "PersonNameLength" value = "5" /> The parameter limits the user's patronymic to the number of characters specified in the value parameter for Access Manager and Time&Attendance reports. Example (if value = "5"): Ivanov Peter Alex. | |
| PersonNameIncludesId | 0, 1 | - | 3.4 | By default, the parameter is not added to the file (corresponds to value 0). Add it to the <appSettings> section in the following format: <add key = "PersonNameIncludesId" value = "1" /> The parameter allows enabling display of the user ID in parentheses after the user full name in the Access Manager and Time&Attendance reports. value = "1" - the user ID in parentheses is displayed after the user full name. Example: Ivanov Peter Alexandrovich (1) value = "0" - the user ID is not displayed. | |
| SweatheartingEnabled | 0, 1 | 0 | 3.4 | Enables the Sweethearting report. | |
| SweatheartingAddItemPosFunctionNumber | >=0 | - | 3.4 | Sets the Adding product to document function number from the dbo.FuncDic table, which is necessary for the Sweethearting report proper operation. | |
| SweatheartingBeginReceiptPosFunctionNumber | >=0 | - | 3.4 | Sets the function number used as the receipt beginning from the dbo.FuncDic table. | |
| SweatheartingEndReceiptPosFunctionNumber | >=0 | - | 3.4 | Sets the function number used as the receipt ending from the dbo.FuncDic table. | |
| SweatheartingFilterByReceiptIntervals | 0, 1 | 0 | 3.4 | Enables the sweethearting events filtering so that only the events which occured while the receipt was open were displayed in the Sweethearting report. | |
| SweatheartingAddTimeoutMs | >=0 | 500 | 3.4 | Sets the timeout between the sweethearting detector event and the POS event. If this timeout is exceeded, the sweethearting event is added to the Sweethearting report. | |
| SweatheartingBeepEnabled | 0, 1 | 0 | 3.4 | Disables the sound notification about new events in the Sweethearting report. | |
| SweatheartingStepCount | >=0 | 1000 | 3.4 | Sets the required number of the events which should be preloaded on the first Sweethearting report launch. | |
| SweatheartingPreloadDays | >=0 | 140 | 3.4 | Sets the required number of days the events from which should be displayed on the first Sweethearting report launch. | |
| ExtendedPresenceReportInWorkplace | true, false | false | 3.4 | Enables an advanced display of the reports: Report on presence at the workplace and General report on presence at the workplace. | |
| EnablePasskindReport | true, false | false | 3.4 | Enables a Report on issued passcards. | |
| lpServerUrl | IP-адрес | http://localhost:10001/lprserver | 3.4 | Sets the server address where the recognized LP images and the vehicle frames are stored. | |
| IntellectVideoStreamNumber | 0-4 | 0 | 3.4 | Sets the required camera stream number in live video reports (0 is the first camera stream). |
FACE-Intellect
| XML file | Parameter | Available values | Default | Parameter in effect |
|---|---|---|---|---|
| <Directory of the Intellect software installation>\Modules\face_client.run.config | ProblemImages | Path to a folder | None | Path to the folder for storing images which haven't been added to the database is specified in the parameter value. The specified folder will be created automatically. Note. If %USER% is specified in the parameter value, the images which haven't been added to the database will be stored in the folder: c:\Users\%LOGGED_USER%\AppData\Local\AxxonSoft\FaceIntellect\ProblemImages\ |
| AutoSizeColumnHeaders | true, false | false | Activates the automatic columns resizing of columns in the Face recognition and search interface window in proportion to its size when it is changed (see Setting the parameters for the Face recognition and search interface object). | |
| AnalitycTimeout | >=0 | 100000 | Specifies the time in milliseconds for refreshing the analytical data in the Face recognition and search interface object. When the time expires, the Operation has timed out error will be displayed (see Viewing the analytical data). | |
| RestRequestInterval | >=0 | 500 | Specifies the time interval in milliseconds between the HUAWEI module requests (see Configuring the HUAWEI face recognition module). |
Overview
Content Tools