Documentation for Axxon PSIM 1.0.0-1.0.1.

Previous page Configuring Sensor-Relay expansion cards (low profile)  Connecting sensors of 4/4 Sensor-Relay expansion cards (low profile) Next page


Depending on what video capture card is in use, the Relay objects corresponding to relays connected to 4/4 Sensor-Relay card (low profile) are created under the Video Capture Device objects of one of the following types: SC200Q4 Low profile (FS 115), SC300Q16 (FX 4), SC300D16 (FX 8), SC310N16 (FX 16), SC3B0N16 (WS 216), SC230N4 and SC590N4.

At least one Camera object is to be created under the same Video Capture device object for relay to work.

The Relay objects are to be created under the Video Capture Device object that has the first PCI channel. E.g., when building security video subsystem with the use of two SC300Q16 (FX4) and two Sensor-Relay cards (low profile) the Relay objects are to be created under the Video Capture Device objects with 00 (for the first SC300Q16 (FX4) card) and 04 (for the second SC300Q16 (FX4) card) values of PCI channels.

If the 4/4 Sensor-Relay card (low profile) is installed on SC3B0N16 (WS216) video capture card, then the Relay objects are to be created under the  Video Capture Device object with 04 value of the PCI-channel.

For SC310N16 (FX16) video capture card the Relay objects can be created under the Video Capture Device object with 00 or 08 value of PCI channel. Working channel is discovered experimentally.

For SC230N4 video capture card the Relay objects are to be created under the Video Capture Device object with 03 value of PCI channel.

For SC590N4 card Relay objects can be created under the Video Capture Device object with number of PCI-channel equal to 01 (see Connecting 4/4 Sensor-Relay (low profile) cards section for Sensor-Relay cards connected to low contacts of J2 connector of CS590N4 card) and to 03 (for Sensor-Relay card connected to top contacts of J2 connector of SC590N4 card). If the SC590N4 card is in use do not create not more than 4 Relay objects for one Video Capture Device object.

Note

Number of PCI channels (number of the Video Capture Device objects) for all types of cards is given in Features of video subsystem configuration section.

One can create up to 4 Relay objects under the Video Capture Device object. When configuring the Relay objects one is to specify the channel numbers of relay connection to 4/4 Sensor-Relay card (low profile) according to external pinout of the card. 

To change the channel numeration, use the Channel Number list on the settings panel of the Relay object.

4/4 Sensor-Relay card (low profile) allows connecting up to 4 relay channels according to the license key file.

The figure below shows an example of the channel numeration configuration of 4 relays connected to one 4/4 Sensor-Relay card (low profile).

Channels of the second 4/4 Sensor-Relay card (low profile) are numbered 1-4.