Configuration of the SIP-device audio subsystem in the Intellect software

To configure the audio subsystem if SIP-device in the Intellect software, do the following:

1. On the Hardware tab select the Computer object corresponding to the Intercom Subsystem Server.
   
2. Click the right mouse button on the Computer selected object and choose the Create object - > Audio Card item from the context menu.
3. In the opened box set the number and name of Audio Card object and then click Apply button.
   
4. As a result the settings panel of Audio Card object will display.
   
5. From the Plate drop-down list select the IpCam SIP <IP-address> value where <IP-address> - IP-address of SIP-device (1).
6. To save changes click Apply button (2).
7. Create the Microphone object corresponding to the microphone of SIP-device. On the Hardware tab select the Audio Card object created on 1-6 steps.
   
8. Click the right mouse button on selected Audio Card object and choose the Create object - > Microphone item from the context menu.
9. In the opened box enter the number and name of Microphone object and then click Apply button.
   
10. As a result the settings panel of Microphone object will display.
    
11. From the Channel drop-down list select the IpCam SIP <IP-address> LineIn(#0) value, where <IP-address > - IP address of SIP-device.
12. To save changes click Apply button.
13. Create the virtual microphone for mixing audio stream from the microphone and audio stream receiving to speaker of SIP-device to the single audio stream. Repeat steps 7-10 for it.
14. From the Channel drop-down list select the IpCam SIP <IP-address> LineIn(#1) value where <IP-address > - IP address of SIP-device and click Apply button.
    
15. Repeat steps 1-14 for all required SIP-devices.

Configuring of SIP-devices audio subsystem in the Intellect software is completed.