The Settings panel of the RTSP Server object

The settings panel of the RTSP Server object is shown in figure. Corresponding tables describe the settings on the RTSP Server object settings panel.

The Basic settings tab

№	Parameter	Method for setting the parameter value	Parameter description	Symbols used	Default value	Value range
1	ID*	Automatically	Displays the ID of the RTSP Server object in the video surveillance system	Sequence of numbers	-	Depends on the number of the RTSP Server objects in the video surveillance system
2	Name*	Type-in the value in the field	Sets the name of the RTSP Server object in the video surveillance system	Latin, Cyrillic and service characters	RTSP Server	A line containing a sequence of any symbols (letters, digits, service characters apart from > and < symbols), not case-sensitive. Number of symbols – from 1 to 60.
3	Disable	Checkbox	Sets the state (enabled or disabled) of the RTSP Server object in the video surveillance system	Boolean type	No	Yes – the RTSP Server object is disabled and is not in use. No - the RTSP Server object is enabled and is in use.
4	Computer	Selected in the list	Sets the parent Computer object to which the RTSP Server object relates	Names of the Computer objects registered in the system	Name of the parent Computer object	Depends on the number of Servers in the video surveillance system with distributed architecture
The Basic settings tab
5	Cameras	Checkbox	Specifies cameras video from which is to be transmitted to remote workstations	Boolean type	No	Yes – video stream can be viewed at remote workstation. No – video stream cannot be viewed at remote workstation
6	Gate	Select the value in the list	Specifies the Video gate through which video is received from the camera	The names of the Video gate objects registered in the system	-	Depends on the number of the Video gate objects registered in the system
7	Port	Type-in the value in the field	Sets a port via which a video signal from the camera is transmitted. Note. This column is available only if is the Multicast* check box is set checked (11).* Note 2. Specified ports are not addressed directly. Use RTSP port to get video from all cameras in the Multicast* mode (see item 13).*	Sequence of numbers	-	Any numbers of ports that are not in use. The number of ports is specified by the system administrator.
8	Backup arch.	Select the value in the list	Specifies the Backup archive from which archive is received for the camera	The names of the Backup archive objects registered in the system	-	Depends on the number of the Backup archive objects registered in the system
9	Unicast	Checkbox	Enables the "unicast" transmitting mode	Boolean type	Yes	Yes – the video is transmitted in the "unicast" mode. No – the video is not transmitted in the "unicast" mode.
10	RTSP port	Type-in the value in the field	Sets the port via which video is transmitted	Sequence of numbers	554	Any numbers of ports that are not in use. The number of ports is specified by the system administrator.
11	HTTP port	Type-in the value in the field	Sets the port which is to be in use for transmitting video via http-protocol	Sequence of numbers	8081	Any numbers of ports that are not in use. The number of ports is specified by the system administrator.
12	Multicast	Checkbox	Enables video transmission via different RTSP ports. The Multicast mode allows reducing Server load due to transmitted data reduction.	Boolean type	No	Yes – the video is transmitted in the "multicast" mode. No – the video is not transmitted in the "multicast" mode.
13	Receiver IP address	Type-in the value in the field	Set the address from which the broadcast in Multicast mode will be performed	IP address	224.0.1.150	From 224.0.0.0 to 239.255.255.255
14	RTSP port	Type-in the value in the field	Sets the port number through which the video signal will be transmitted in the Multicast mode. When requesting the video data from the camera using the RTSP protocol, it is necessary to specify this port. The system itself forwards the request to the port of the requested camera.	Sequence of numbers	555	Any numbers of ports that are not in use. The number of ports is specified by the system administrator.

The Advanced settings tab

№	Parameter	Method for setting the parameter value	Parameter description	Symbols used	Default value	Value range
1	VLC player compatibility mode	Checkbox	Enables sending the current time to VLC Media Player instead of the frame time.	Boolean type	No	Yes - the current time is sent to VLC Media Player. No - the frame time is sent to VLC Media Player.
2	Use captions track	Checkbox	Enables sending the video captions along with video via RTSP Server displaing them in the receiving app – VLC Media Player.	Boolean type	No	Yes - if there are captions on the video they are sent along with video to the the receiving app. No - the video captions are not sent via RTSP Server.
3	Source IP interface	Select the value in the list	Sets the name of the network interface that should be used to broadcast the RTSP server.		ANY	The list of available network interfaces of the computer. ANY - the default network interface is used.
The NAT Settings group
4	IP addr	Type-in the value in the field	Sets the IP address of the router that performs the NAT broadcasting.	IP address	-	IP addresses range for local network
5	Port	Type-in the value in the field	Sets the port of the router that performs the NAT broadcasting.	Sequence of numbers	0	0-65535

*The name of the element is not displayed in the settings panel of the given object.

Page tree

Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.