Go to documentation repository
Previous page Next page
The list of cameras specified in the configuration panel for the Partition Of Control object defines the cameras whose archives can be accessed through the Search in archive interface object (see the document Monitoring PSIM Software Package: Operator's Guide). In addition, this list defines the cameras whose state and archives are monitored by Agent Of Control.
Depending on whether the list of cameras has been specified or not, the following situations are possible:
In the second and third cases, Monitoring PSIM is performed of the state of the system (network functioning, restarts, etc.) and disks (their number and free space). The state of cameras and their archives is not available for Monitoring PSIM.
Note.
Creation and configuration of the Long-term Archive object is described in the document Axxon PSIM Software Package: Administrator's Guide.
To configure the list of cameras in use:
In the Gaps in the archive (days) field, specify the number of days on which the video archive is not recorded, because non-working days are taken into account in the working schedule (3).
In the Camera connection date field, specify the date the camera was connected to the system (4).
Click the Set for selected cameras listed on the right button (5).
Note.
The ID numbers of cameras and captioners must be whole numbers.
Note
Cameras will be automatically removed from the list in the following cases:
Configuration of the camera list is now complete.