The Settings panel of the RTSP Server object

1

Identification number*

Automatically

Displays the identification number of the RTSP Server object in the digital video surveillance system

Sequence of numbers

-

Depends on the number of the RTSP Server objects in the digital video surveillance system

2

Name*

Enter the value into the field

Sets the name of the RTSP Server object in the digital video surveillance system

Latin, Cyrillic and service characters

RTSP Server

A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive.

Number of characters—from 1 to 60

3

Disable

Set the checkbox

Sets the state (enabled or disabled) of the RTSP Server object in the digital video surveillance system

Boolean type

Clear

Set—the RTSP Server object is disabled and isn't used

Clear—the RTSP Server object is enabled and used

4

Computer

Select the value from the list

Sets the Computer parent object to which the given RTSP Server object belongs

Names of the Computer objects registered in the system

Name of the Computer parent object

Depends on the number of Servers in the digital video surveillance system with the distributed architecture

5

Cameras

Set the checkbox

Specifies the cameras the video signals from which should be transmitted to remote workstations

Boolean type

Set—the video stream can be viewed at a remote workstation

Clear—the video stream cannot be viewed at a remote workstation

Gate

Select the value from the list

Specifies the Videogate through which video is received from the camera

Names of the Videogate objects registered in the system

-

Depends on the number of the Videogate objects registered in the system

Set—the video is transmitted in the "unicast" mode

Clear—the video isn't transmitted in the "unicast" mode

9

RTSP port

Enter the value into the field

Sets the port via which the video signal will be transmitted

Sequence of numbers

554

Any available unused port numbers.

The number of ports is specified by the system administrator

10

HTTP port

Enter the value into the field

Sets the port which should be used for transmitting the video signal via the http protocol

Sequence of numbers

8081

Any available unused port numbers.

The number of ports is specified by the system administrator

11

Multicast

Set the checkbox

Enables the video transmission via different RTSP ports.

The Multicast mode allows reducing the Server load by reducing the amount of the transmitted data

Boolean type

Set—the video is transmitted in the "multicast" mode

Clear—the video isn't transmitted in the "multicast" mode

12

Receiver IP address

Enter the value into the field

Sets the IP address from which the video will be transmitted in the Multicast mode

IP address

224.0.1.150

From 224.0.0.0 to 239.255.255.255

Enter the value into the field

Sets the port number via which the video signal will be transmitted in the Multicast mode. When requesting the video data from the camera using the RTSP protocol, it is necessary to specify this port. The system forwards the request to the port of the requested camera

Sequence of numbers

555

Any available unused port numbers.

The number of ports is specified by the system administrator

№

Parameter

Method for setting the parameter value

Parameter description

Symbols used

Default value

Value range

Set—the current time is sent to VLC Media Player

Clear—the frame time is sent to VLC Media Player

Set—if there are captions on the video image, they are sent to the the receiving app

Clear—the video captions are not sent via the RTSP Server

The list of the available network interfaces of the computer.

ANY—the default network interface is used