To configure the panel of the Unipos7000 controller integration module, do the following:

  1. Go to the settings panel of the Unipos7000 panel object that is created automatically when you download the configuration on the basis of the Unipos7000 controller object (see Configuring the object of the Unipos7000 controller integration module).

  2. In the Address field, specify the address of the controller.
  3. In the Port field, specify the port for connection to the controller.
  4. In the Ip field, specify the IP address of the controller.
  5. In the Modbus address field, specify the address of the Modbus protocol that is specified in the manufacturer's software.
  6. In the Ping (sec) field, specify the time in seconds after which an event of loss of connection with the controller is generated.
  7. In the Shutdown alert timeout (sec) field, specify the time in seconds during which an event of loss of connection with the controller is generated.

  8. Click the Apply button to save the settings.

  • No labels