Going to user search

You can go to user search in one of the following ways.

The first method:

1. Right-click the Departments tab.
2. Select the required search parameter in the Search function menu—see General information about user search.
   

The second method:

1. Go to viewing a list of users (see Viewing a list of users).

2. Right-click the free area in the users list or right-click the user.

   Note

   You can also go to user search using the Ctrl+F keyboard shortcut—see Keyboard shortcuts for working with interface elements. The Search in department tab opens, in which the search condition by the department is specified.

3. In the Search function menu, select the required method of search—see General information about user search.
   

As a result, a new search tab opens (1). The name of the tab depends on the selected method of search. The tab contains the following interface elements:

1. List of search rules (2).
2. List of found users (3).
3. Parameters of the selected user (4).
   
4. If you search by number, surname, card or access level, the corresponding rule will be specified in the list 2. You can add search rules to the list if it's required (see Adding a search rule).
5. If you search by card using a control reader, the Access card reading window opens:
   
   1. From the Reader drop-down list, select the control reader. 
   2. Click the Start reading button. 
   3. Present the user's card to the selected reader.