ONVIF embedded analytics

ONVIF embedded analytics are embedded detection tools supported on the side of an IP device via the ONVIF protocol. The list of IP devices supported via the ONVIF protocol is provided in the documentation.

To configure an embedded detection tool, do the following:

1. Configure a detection tool in the web interface of an IP device.
   

   Attention!

   • The settings of embedded detection tools are described in the official documentation of an IP device.

   • In order to receive events from an embedded detection tool to Axxon One, you must configure the schedule in the web interface of an IP device and select days and time of operation of an embedded detection tool.

2. Add an IP device to Axxon One (see Searching, adding, configuring and removing IP devices).
3. Configure recording to an archive (see Configuring recording to an archive).
4. Create the required embedded detection tool (see Configuring detection tools and their sub-tools).
5. Configure macros to initiate (see Initiating an alarm in the system) and stop alarms (see Stopping an alarm).

Configuration of an embedded detection tool is complete. If necessary, you can change some settings of an embedded detection tool in the Axxon One interface.

Events from an embedded detection tool are displayed in the events feed (see Checking events of a detection tool).

Rules is a special type of embedded detection tool based on advanced analytics and Profile M that is used for flexible configuration of each embedded detection tool (see Adding the ONVIF Profile M embedded detection tools). You can use it to configure, for example, multiple Embedded motion detection tools with different detection areas and sensitivity on the same IP device.