Go to documentation repository
SIP-operators are configured as follows:
- Create a SIP-operator object based on the SIP-terminal object.
In the Number field (1) enter the identification number for calls.
If it is necessary to bind a SIP-operator to the Axxon PSIM user rights, set the Bind operator to user rights checkbox (2) and select the corresponding Axxon PSIM user from the User drop-down list (3). It is used when the User rights are selected by default on the operator's SIP panel.
From the Device priority drop-down list (4), select the priority of a call from this operator in the incoming calls window of the SIP panel. The lower the number, the higher the priority, hence, the higher the call is displayed in the list. If the field is left blank, the priority is considered to be minimal. Calls from operators with the same priority will be sorted by the time of the call.
In the Address books table (5), select the required address books, the numbers of which should be available for this SIP-operator (see Configuring address book of SIP-terminal).
Note
To add new lines to the table, use the Down key on your keyboard. To delete a line, use the Ctrl+Del key combination.
To add all address books, click All (6).
To add several address books, click Range (7). This will open the Add address books window.
Select the required address books from the left list (1) and use the buttons (2) to move them to the right list (3).
Click the Apply changes and close button (4).
Click Apply (8).
The SIP-operators of the Axxon PSIM's SIP server are configured.
Overview
Content Tools