Documentation for Axxon PSIM 1.0.0-1.0.1.

Previous page Binding Audio player to the Monitor  Configuring the interface of the Surveillance window Next page


In the Axxon PSIM software the image from the video camera can be panned while displaying it on the Video surveillance monitor and viewing the video archive. Available rotation angles are 90, 180 and 270 degrees.

 To configure the rotation angle, do the following:

  1. Go to the Hardware tab of the System settings dialog box (1).
  2. Select the Camera object corresponding to the video camera from which the video image is to be rotated while displaying (2).
  3. Go to the Advanced settings tab (3).
  4. Set the Rotation mode checkbox to activate the rotation function (4).
  5. From the drop-down list, select the rotation angle (5).
  6. To save settings in the Axxon PSIM software, click the Apply button (6).

Note.

On default the video signal is displayed in the Video surveillance window in initial non-rotated state. To rotate the video image, select the Pan function in the Processing sub-menu of the Video surveillance window − see the Operator's Guide document.

Configuring a rotation angle of the video image is completed.

  • No labels