Documentation for Axxon PSIM 1.0.0-1.0.1.

Previous page Configuring the combobox  Configuring the radio button Next page


Configure the comment as follows:

  1. On the Logic tab, select the required element in the table and click the Edit button.
  2. If necessary, in the Step description field (1), enter the text that will be displayed in the column to the left opposite the element.

  3. If necessary, in the Text field (2), enter the text that will be displayed in the comment input form.

    Note

    To display the current date and time in the input form, enter %time%. In this case, at the moment the Comment element is displayed, the date and time of the computer will be automatically recorded.

  4. In the Button text field (3), enter the text that will be displayed on the button.
  5. If the comment should be required, in the Comment required field (4) select Yes.
  6. If it is necessary to block the ability to edit the comment by the Operator, in the Read only field (5) select Yes.
  7. In the Minimum height and Maximum height fields (6), enter the minimum and maximum height of the comment input field in pixels. When the maximum value is exceeded, a scroll bar is displayed. The default value for both fields is 100.
  8. In the Default transition field (7), select the element that should be displayed after clicking on the button.
  9. If it is necessary to execute a macro command by clicking the button, select it from the Macro list (8).
  10. Click OK.

Example of displaying the Comment element:

  • No labels