The Settings panel of the Video capture device object

The settings panel of the Video capture device object is shown in the figure.

Table describes the setting parameters of the Video capture device object.

№	Parameter	Method for setting the parameter value	Parameter description	Representation	Default value	Value range
1	Identification number	Automatically	Displays the identification number of the Video capture device system object	Sequence of numbers	-	Depends on the number of the Video capture device objects in the system
2	Name	Enter the value in the field	Sets the name of the Video capture device object in the system	Latin, Cyrillic letters and service characters	Video capture device	A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive. Number of characters—from 1 to 60
3	Disable	Set the checkbox	Sets the status (enabled or disabled) of the Video capture device object in the system	Boolean type	-	Set—the Video capture device object is disabled and isn't in use Clear—the Video capture device object is enabled and is in use
4	Computer	Select from the list	Sets the Computer parent object for this Video capture device object	Name of the Computer objects registered in the system	Name of the Computer parent object	Depends on the number of the Computer objects in the system
The Basic settings group
5	Type	Select from the list	Sets the type of the video capture board or the manufacturer of the IP device	Name of the types of the video capture boards and the manufacturers of the IP devices	-	Video capture boards (FS-3, FS-5, FS-6, FS-8, WS–4, WS-7/17, etc.). Network video hubs (WaveHub) Network devices (Axis, Panasonic, and others) Virtual, Virtual bench
6	Model	Select from the list	Sets the model of the IP device	Names of the models of the IP devices		Integrated models of the IP devices of the selected manufacturer
7	Firmware	Select from the list	Sets the firmware of the IP device	Numbers of the integrated firmware of the IP device		Integrated firmware of the selected IP device
8	PCI channel	Select from the list	Sets number of the PCI channel of the video capture board ADC	List of connected channels for video capture	-	From 0 to 31, depending on the number of the PCI channels on the Server and the number of installed ADCs
9	Signal	Select from the list	Sets the format of the incoming video signal	List of video signal formats	PAL	PAL, NTSC
10	Resolution	Select from the list	Sets resolution of the video frames	List of video frame resolutions	Standard	Standard High Full Specific values depend on the camera model
11	Speed	Set in the required position	Sets the frame rate of the video stream	Permissable changes of the total frame rate of the video signal transmission	Average	Depends on the capabilities of the IP-camera or video capture board. For boards with software compression: Max—maximum permissable total frame rate of the video signals Average—half of the maximum permissable total frame rate of the video signals Min—one third of the maximum permissable total frame rate of the video signals
12	IP address	Enter the value in the field	Sets the IP address of the network device	IP address	-	A line presented as xxx.xxx.xxx.xxx Contains the values: 0.0.0.0 – 255.255.255.255 Depends on the network settings of the IP devices registered in the system When configuring getting live video from the ECHD Server, specify the following line in the field <ECHD Server address>:<GUID cameras in the system>:<external account>
13	Port	Enter the value in the field	Sets the connection port of the network IP device	Nonnegative integer	-	From 0 to 65535 Depends on the network settings of the IP device
14	RTSP	Enter the value in the field	Sets the RTSP connection port of the network IP device	Nonnegative integer	-	From 0 to 65535 Depends on the network settings of the IP device
15	Name	Enter the value in the field	Sets the user name to connect to the network IP device	-	-	Depends on the network settings of the IP device
16	Password	Enter the value in the field	Sets the password to connect to the network IP device	-	-	Depends on the network settings of the IP device
17	Activate watchdog	Set the checkbox	Activates the Windows reset function, when Axxon PSIM main modules freeze	Boolean type	Clear	Set—the reset function of Windows OS is enabled Clear—the reset function of Windows OS is disabled
18	Use device settings	Set the checkbox	Allows using the settings specified in the Web-Server or other software of the IP device	Boolean type	Clear Note. When creating the Video capture device* object using the Camera discovery tool, the value of the checkbox depends on the settings configured in the Wizard*	Set—the settings of the IP device are used Clear—the settings of Axxon PSIM are used

Page tree

Documentation for Axxon PSIM 1.0.0-1.0.1.