Documentation for Auto Intellect 5.6. Documentation for other versions of Intellect is available too.

Previous page Manual alarm triggering  Alarm processing Next page


The Alarms protocol tab located in the upper area of the Online monitor window (1) automatically becomes available in case of the alarm event. The alarms protocol is a table which contains the information about the vehicles for which the alarms were triggered (2). 

Note.

The information about the last alarm is displayed on the tab.

The alarms which were not processed by the operator, are highlighted with red, and processed alarms are highlighted with yellow (see Alarm processing).

Note.

Processed events may not be displayed (see Hiding the processed events in the protocol).

To view the alarms protocol, do the same as to view the identified vehicles protocol (see Viewing the identified vehicles protocol). The only difference is that for an alarm the information about the alarm reason is also displayed:

  1. Marked by the operator - means the alarm is triggered by the operator (the time of triggering is also displayed);
  2. Is found in: <external database name> - means the identified LP is found in the external database;
  3. Overspeeding - means the vehicle overspeeding is registered.

Detailed information about an alarm with the alarm reason is displayed in the Last event  group (see Viewing the data about the last identified vehicle). To view the detailed information about an alarm, do the same as to view the information about the event, registered in the identified vehicles protocol (see Viewing the identified vehicles protocol).

In case the identified vehicle LP is found in the External Plates Database, the information about the vehicle, stored in this base, will be displayed in the field (3). 

Note

To display the side panel, click the (4) button.

  • No labels