Documentation for Face Intellect 7.4. Documentation for other versions of Intellect is available too.
Previous page
Next page
To go to the monitoring mode of captured and recognized faces click the Monitor button in the Face recognition and search interface window.
The following information is displayed in the information field of each captured face (1):
| Column name | Description | Face Recognition module used |
|---|---|---|
| Captured face | Captured face image Note 1. As you increase the width and height of this column, the image size also increases. The specified column size does not change even if the Columns auto width checkbox is set (see Configuring permissions and additional settings). Note 2. Starting with Face-Intellect 7.3, the captured face image is not duplicated in the list of captured faces, but it is updated in the same cell while the tracker "sees" it. To change the mechanism of displaying faces, it is necessary to change the value of the Face.RecognizeFacesSeparately parameter to 1 (for details, see Registry keys reference guide, for information about working with the registry, see Working with Windows OS registry). Note 3. If the Face Recognition Server works with a thermal camera (see Configuring the Face Recognition Server operation with thermal camera), the image will also display the face temperature in degrees Celsius.
| All recognition modules |
| Original from DB | The image from the reference face DB, if the face was recognized | All recognition modules |
| Full name | Full name, if the face was recognized | All recognition modules |
| Name of face characteristic | Selected face characteristics (see Configuring permissions and additional settings). Note. Face characteristics are not displayed if Face Intellect was updated from version 7.1. In this case, it is necessary to configure the displaying of additional face characteristics. | All modules except HUAWEI |
| Camera | The camera which is a captured face source | All recognition modules |
| Date/Time | The date and time of the face capture by the camera | All recognition modules |
| ID | The face ID, if the face was recognized | Only HUAWEI |
The color of the information field of the recognized face may indicate the following:
- The level of similarity of captured face with the most corresponding face from the face recognition database. The conditional thresholds of similarity levels are set when configuring the Face recognition and search interface module (see Configuring the color highlighting by face similarity).
- The face belongs to a department for which an arbitrary color is set (see Setting color highlighting of faces that belong to selected departments).
If the Follow new faces checkbox is set, the list of faces is scrolled up to the top when a new face is captured even if some face is selected in it. To disable automatic list scrolling, unset the Follow new faces checkbox. You can also double-click the captured face to unset this checkbox. In this case the list is not scrolled up when new faces are captured.
Note
In order for the Follow new faces checkbox to be set automatically after a certain time, it is necessary to set the corresponding time in seconds in the AutoFollowTimeSeconds parameter of the face_client.run.config configuration file (for details, see XML-file parameters reference guide).
If the captured face was recognized, then in the upper right part of the captured faces monitoring panel (2), an alarm window is displayed with the following information:
The title of the alarm window;
Note
The alarm window color and title can be changed (see Alarm window title setting).
- Full name of recognized person;
The image with the captured face and the corresponding image from the face recognition database;
Note
If the Face Recognition Server works with a thermal camera (see Configuring the Face Recognition Server operation with thermal camera), the image will also display the face temperature in degrees Celsius.
- The similarity level as a percentage.
The lower right part of the captured faces monitoring panel (3) displays the following information:
The Face DB section displays the information on the recognized face and contains the following information:
Column name Description Face Recognition module used Image The recognized face image
Note. As you increase the width and height of this column, the image size also increases. The specified column size does not change even if the Columns auto width checkbox is set (see Configuring permissions and additional settings)
All recognition modules Full name The full name of the recognized person All recognition modules Similarity level The similarity level between the recognized face and the face image All recognition modules Comment The comment All modules except HUAWEI Date/Time The date and time of the search All recognition modules ID The recognized face ID Only HUAWEI The Cameras section displays the 10 recently captured faces that are similar to the selected face filtered by the specified filtering conditions (see Filtering recognized and unrecognized faces). The field contains the following information:
Column name Description Face Recognition module used Image The captured face image
Note 1. If the Face Recognition Server works with a thermal camera (see Configuring the Face Recognition Server operation with thermal camera), the image will also display the face temperature in degrees Celsius.
All recognition modules Similarity level The similarity level between the captured face and the selected face All recognition modules Camera The camera that captured the face All recognition modules Date/Time The date and time of the search All recognition modules
The View button (4) allows you to change the location of information panels 1-3 on the monitoring screen according to the preset.
Note
You can hide the View button. To do this, in the face_client.run.config configuration file, set the value of the HideViewButton parameter to True (for details, see XML-file parameters reference guide).
If the video from camera (used for face recognition) is transmitted to the Monitor interface object, then the full name is displayed below the face capture area (see Configuring video display on Video Surveillance Monitor).
Note
If the Face Recognition Server works in conjunction with a thermal camera, also see Thermal camera operation.