Documentation for Axxon One 2.0. Documentation for other versions of Axxon One is available too.

Previous page View camera  Start export Next page

General information

This action allows you to check if a camera or a group of cameras is armed (see Arming and disarming a camera).

Configuring an action

To configure this action, do the following:

  1. Go to the Programming tab.
  2. In the Event rules or Cycle rules list, click Create... (see Configuring macros).
  3. Select a start condition that triggers a macro (see Configuring start conditions).
  4. Click the  button below start conditions.
  5. From the drop-down list, select Check if the camera is in armed mode.
  6. In the Camera parameter, select a camera or group of cameras that you want to check.

  7. In the Execute if the camera is in armed mode parameter, select an action that must be executed if the checked camera is in armed mode.
  8. In the Execute if the camera is not in armed mode parameter, select an action that must be executed if the checked camera isn't in armed mode.
  9. Click the Apply button.

Configuration of the Check if the camera is in armed mode action is complete.

  • No labels