You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

On the page:

General information

MomentQuest is used to search moments by the required search types:

  1. Thumbnail search.
  2. Events search.
  3. Line crossing.
  4. Motion in area.
  5. Loitering.
  6. Multiple objects.
  7. Move from area to area.
  8. Bookmarks search.
  9. Titles search.
  10. Search by temperature.
  11. Search by LPs.
  12. Vehicle search.
  13. Face search.
  14. Face contacts search.
  15. Similitude search.
  16. Search by barcode.
  17. Person appearance search.
  18. Search by tampering type.
  19. Meta search.

Note

  • In the current version of Axxon One, the search is possible only by one type at a time.
  • In the embedded camera storage (see Selecting an archive), the thumbnail search is only available.

Requirements for the MomentQuest 

To search in the archive, you must have the following:

  • Activated license key with the MomentQuest feature (see Axxon One license types).
  • Access rights (see Roles):
    • In the Access to Search in archive mode parameter, the Yes value is set.
    • In the Camera access parameter, one of the following values is set: Live/Archive, Live/Archive/Control, Live/Archive/Control/Configure.
  • Configured archive recording (see Configuring recording to an archive).
  • Followed the requirements for the video stream and scene for the operation of the used detector (see Detectors, Metadata database).
  • Depending on the detector used, you must set the Yes value in its settings for the following parameters: Record objects tracking, Check in lists, or Record mask to archive.

Switching to the MomentQuest

You can switch to the MomentQuest mode using:

  1. Surveillance windows:
    1. Select the required layout on the layouts panel (see Configuring layouts).
    2. Select the required camera.
    3. Click the Search button located in the lower right corner of the surveillance window. By default, when you switch to the MomentQuest mode from the surveillance window, one camera is selected.
  2. The MomentQuest button located at the top panel. When you switch using the MomentQuest button, all cameras of the layout are selected.

To change the number of cameras, do the following:

  1. Click the Selected cameras button.

  2. In the Objects panel window that opens (see Objects panel), set the checkboxes next to the required cameras. To search for all domain cameras, you must set the checkbox next to the domain name.

Note

  • By default, the checkbox is set next to the camera that is switched to the Archive mode. You cannot clear the checkbox next to this camera.
  • If you want to change the active camera, you must switch again to the Archive mode.
  • When you search in the archive, several cameras simultaneously support the timeline (see The Timeline) to specify the beginning and end of the viewed fragments. This can affect the search result: the closer the timeline is set, the smaller the fragments used for the search.
  • One timeline is displayed for all selected cameras in the archive mode.

If you perform the face search (see Search for similar face) or the LPs search (see Search by LPs) in the archive of several cameras at a time, the map (see Opening and closing the map) marks the approximate graph of the detected objects' movement. The date and time of detection are specified next to the icon of each camera.


  • No labels
Error formatting macro: children: java.lang.NullPointerException