Documentation for Auto Intellect 5.0. Documentation for other versions of Intellect is [available too].

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Setting up the CARMEN-parking program module is done in the following way:

  1. Go to the Hardware tab in the system setting dialog window (Fig. 7.2—5, 1).
  2. In the objects tree on the Hardware tab select the CARMEN-parking object, corresponding to the set CARMEN-parking program module (Fig. 7.2—5, 2). The settings panel of the selected object will open on the right side of the window.


Fig. 7.2—5 Setting up the CARMEN-parking program module

  1. In the «Recording frame rate» field enter the value of recording frame rate per second (Fig. 7.2—5, 3).
  2. Enter the value in the «Frames number for recognition» field (Fig. 7.2—5, 4).
  3. Enter the value in the «Number of lanes» field (Fig. 7.2—5, 5).
  4. Click «Apply» to save the changes (Fig. 7.2—5, 6).

Setting up the CARMEN-parking program module is completed.

  • No labels