The Architecture tab

1

Computer

Network name of the computer

Is defined by the OS

2

Name

Computer name in the system

Is defined in the Hardware settings tab

3

Connection

Check mark

If the box is checked, it means that the computer is connected. If the box is not checked, it means that

connection was not established.

4

With computer

List of names of the network computers

Is defined by the OS

5

IP-address

IP-address of the computer in the local network

(if connected via the Internet, then public IP-address)

Is either defined by the OS or assigned manually. When IP-address of the Server/RAW is edited, then IP-address

only for the current Server/RAW is changed. For other Servers/RAWs IP-addresses are to be changed individually.

In case of the entered address is already specified to a computer in the system, the address will be set to the configured

computer and the corresponding warning message will be displayed. Address of the computer which previously had this

address will be discarded.

6

Send messages

Checkbox

A checked box means there is permission for sending the messages to the computer it is connected to.

A non-checked box means there is no permission for sending the messages.

7

Type

List of the system objects, from which the events will be broadcast to the selected computers.

Is defined by the list of the registered objects.

8

Event

A check mark in the list across each point of the event list,

corresponding to the hardware selected in the Type column.

A checked box means that the given event will be broadcast. 

A non-checked box means that the given event will not be broadcast.