Go to documentation repository
Documentation for Intellect 4.10.4. Documentation for other versions of Intellect is available too.
Previous page
Next page
Tables
Designations
The following designations are in the reference guide:
(x32) - HKEY_LOCAL_MACHINE\SOFTWARE\ITV\INTELLECT\ registry section
(x64) - HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ITV\INTELLECT registry section
General information on Windows OS registry and working with it is given in the Working with Windows OS registry section of the Administrator's Guide.
Video | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\Video | AcsStdLimit | 1-30 | 1 | 4.8.0 and later | Sets the upper limit of succession of frames in the stream in the MJPEG format. If the succession of frames sent to the remote workstation rises to the value specified in the registry key, then scaling is enabled. |
x32: (X32)\Video | AcsMpegLimit | 1-30 | 25 | 4.8.0 and later | Sets the upper limit of succession of frames in the stream in the H.264/MPEG4 format. If the succession of frames sent to the remote workstation rises to the value specified in the registry key, then scaling is enabled. |
x32: (X32)\Video | Activecam | 0, 1 | 1 | 4.7.3 and later | Defines whether to activate the camera by the first click. |
x32: (X32)\Video | ActivateTelemetryHotkeys | 0, 1 | 0 | 4.8.2 and later | Defines whether the Telemetry control via hotkeys is activated. |
x32: (X32)\Video | AdaptiveClientFrameSkip | 0, 1 | 1 | 4.8.2 and later | When the value is 0, then scaling on the Server is disabled. It is better not to disable scaling. |
x32: (X32)\Video | AdaptivePlayer | 0, 1 | 0 | 4.7.6. HOTFIX build 214 and later | The key is created on the Server. It defines whether the AdaptivePlayer is enabled. When the playback speed is changed, the Client sends data about new speed to the Server. Every time there is the change the Server clears the succession of frames sent to the Client and starts creating a new one with scaling specified by the Client. Hence, the Client does not get every frame – this reduces the Server load. |
x32: (X32)\Video | FastPlayStep | 1-6 | 1 | 4.8.0 and later | The key is created on the Client. It allows setting the step of playback speeding-up. Example: for the 3 value the speeding-up step is x6 (i.e. playback speed can be x6, x12, x18, etc.), for 5 - x10. Max playback speed is x60. High playback speed can be achieved when the AdaptivePlayer is enabled. |
x32: (X32)\Video | allclientsbps | >=0 | 0 | 4.7.6 and later | Sets the upper limit of total outgoing video traffic: : 0 – not in use; >0 – max bandwidth of outgoing stream for all Video.run clients. |
x32: (X32)\Video | AllowDelete | 0, 1 | 0 | 4.7.3 and later | The key allows deleting files in the archive list when clicking the Del button. |
x32: (X32)\Video | AlwaysServerConnection | 0, 1 | 1 | 4.7.3 and later | Defines whether to connect the Monitor to the Server. |
x32: (X32)\Video\ArchDays | <camera id> | > = 0 | 0 | 4.7.5 and later | Defines whether to store the archive of the specified camera for xxx days. |
x32: (X32)\Video\ArchHours | <camera id> | > = 0 | 0 | 4.7.5 to 4.10 | Defines whether to store the archive of the specified camera for not more than xxx hours. This key can be used only if one disk is selected for storing the archive. Since version 4.10.0 the Store no more than parameter on the settings panel of the Camera object is in use instead of this key. |
x32: (X32)\Video | ArchStatus | 0, 1 | 1 | 4.7.3 and later | Defines whether to send current archive status to the Server. This key can be used only if one disk is selected for recording the archive. |
x32: (X32)\Video | ArchSync | > 0 | 1 | from 4.9.5, 4.8.10 | Defines whether data synchronization between Server and Backup archive is enabled or not. Synchronization is disabled when the value is 0. When the value is > 0 the key sets maximum imbalance of Backup archive depth between channels in minutes. By default the key is not created and its value is 1. The key must be created/modified on the computer corresponding to the Server on the basis of which the Long-term archive object is created |
0, 1 | 0 | 4.7.7 to 4.8.10, 4.9.5 | Defines whether data synchronization between Server and Backup archive is enabled. When synchronization is enabled, the smaller fragments are sent to the Backup archive until the latest recorded fragment is not copied. After this, newly recorded fragments on this camera are not sent until the same number of fragments is copied from every camera. The key must be created/modified on the computer corresponding to the Server on the basis of which the Long-term archive object is created | ||
x32: (X32)\Video | Cfg | - | name | 4.7.3 and later | Sets the name of configuration file. |
x32: (X32)\Video | CheckLostFolders | 0, 1 | 0 | 4.7.3 and later | Defines whether to remove old log files from the oldest directory when going to a new disk. |
x32: (X32)\Video | Compression | 0,1 | 1 | up to 4.8.0 | Defines whether to check and delete the folders and files that are not in the index. |
x32: (X32)\Video | CompressorVersion | 0 - 255 | 110 | from 4.7.3 to 4.9.0 | This parameter defines the recompression mode in the file system. It is not created by default. If the key is created, then its value indicates the codec to perform local recording in. 55 value corresponds to MJPEG. |
x32: (X32)\Video | DebugCam.Camera_ ID | 0, 1 | 0 | 4.7.7 and later | 0 - logging is disabled 1 - logging is enabled |
x32: (X32)\Video | DecompressThread | - | - | Key is not active. | |
x32: (X32)\Video | DecompressWidth<Monitor_number> | - | 4.7.3 and later | Sets the size of frame starting from which the <Monitor_number> starts partial decompression of video signal. For instance, when the value of the DecompressWidth1 parameter is 3000, the Monitor1 will not decompress all frames that are less than 3000 pixels. | |
x32: (X32)\Video | Delay | 0 | up to 4.7.4 | The key specifies the delay (in ms) of sending video to the camera. | |
x32: (X32)\Video | Delta | 0, 1 | 1 | 4.7.3 and later | Allow sending only key frames from Server to Client. |
x32: (X32)\Video | Demo | 0, 1 | 0 | 4.7.3 and later | Defines whether the capture cards are in use or video comes from the file. |
x32: (X32)\Video | DetectionFps | 0.3…30 | 2 | 4.7.8 and later | Sets the speed of the detection zone and main motion detection tool in fps, i.e. the number of frames processed per second by the detection tool. If the key is not created, then the detection tool analyzes only the reference frames. For example, if GOP (group of pictures) = 64, i.e. every 65th frame is reference, then without the key, the algorithm unpacks and analyzes every 65th frame. To reduce the CPU load, increase the key value; as a result, the algorithm will skip some reference frames and will not unpack part of the stream. If the duration of the alarm in the zone is small, and the alarm does not have time to get to the analyzed frame, reduce the key value. However, if the key value is less than the GOP specified in the camera’s web interface, the detection tool will unpack the entire stream to analyze the required frames, increasing the CPU load. |
x32: (X32)\Video | DisconnectInactive | 0, 1 | 0 | 4.8.0 HotFix | Defines whether the Monitor disconnects the gate if the screen is minimized: 1 - disconnect inactive monitors from the Servers (gates, archivers) |
x32: (X32)\Video | DLinkHttpPort | 80 | up to 4.8.0 | Port for VitaminControll; DLink from 2000 to 6000 series are compatible with it. The key is not in use. | |
x32: (X32)\Video | DrawCursor | 0 | up to 4.8.0 | The key is not in use. | |
x32: (X32)\Video | Drv | - | - | up to 4.7.6 | The key is not in use. |
x32: (X32)\Video | EnableSnapShotMode | 0, 1 | 0 | 4.7.3 and later | Triggers camera in the snapshot mode, for Axis and D-link 900, operates with the delay. |
x32: (X32)\Video | ExportDir | Path to a folder | moduledir + "\export" | 4.7.3 and later | Specifies the directory for saving frames and recordings from monitor interface (but not via background export, see AviExport utility). |
x32: (X32)\Video | ExportTime | > = 0 | 0 | 4.7.3 and later | Specifies time (in ms) for exporting snapshot from live video into jpg. |
x32: (X32)\Video | Filter.Exclude | Event name | not created | up to 4.8.0 | Excludes the events. Format: Filter.Exclude.event_ID. The parameter value is the name of the event to be excluded. Example: "Filter.Exclude.0"="MD_INFO" "Filter.Exclude.1"="MD_START" |
x32: (X32)\Video | FreeMB | > 0 | 1000 | 4.7.3 to 4.9.5 | Sets free space in the section while storing the archive; when the limit is reached the earliest recordings will be deleted on loop. |
| 5000 | 4.9.6 and later | ||||
x32: (X32)\Video | FreeMbCritical | >0 | 100 | 4.8.4 to 4.9.5 | Specifies free space in the section while loop recording. |
| 1000 | 4.9.5 and later | Sets critical free space; when the limit is reached archive is stored on another disk (if several disks are in use). | |||
| x32: (X32)\Video x64: (x64)\Video | ArchFreeMB | >0 | - | 4.8.8 and later | Specifies free space in the section while loop recording of reserve archive which is not in use for storing reserve archive and can be in use for recording temporary files. If key is not created, the value created by the FreeMB key is in use. |
x32: (X32)\Video | GateNoRec | 0, 1 | 0 | 4.7.3 and later | Defines whether the gate performs recording to the archive. |
x32: (X32)\Video | Hide | 0, 1 | 1 | 4.7.3 and later | Defines whether the "Hide Monitor" button is visible or hidden: 0 – hidden, 1 - visible. |
x32: (X32)\Video | HideMask | 0, 1 | 0 | 4.7.3 and later | Defines whether to hide the image with the mask filled with black. |
x32: (X32)\Video | Hubslowspeed | 0, 1 | 0 | 4.7.3 and later | For wavehub. Affects fps. Slows down the multiplexer stepping rate. |
x32: (X32)\Video | HWCompression | - | 3 | The key is not in use. | |
x32: (X32)\Video | Index | - | 2 | 4.7.3 and later | Shows whether file indexing is in use. The value is not to be modified as file indexing is always in use. |
x32: (X32)\Video | InfinityAutoturn | - | - | up to 4.7.6 | Defines on what Infinity cameras the autoturn is to be enabled (camera IDs are specified and separated by commas). |
x32: (X32)\Video | IPCamPort | 0 -65535 | 80 | up to 4.7.6 | Port for IP cameras; action available: connect via the specific port. |
x32: (X32)\Video | IsPeriod | 0, 1 | 0 | 4.7.3 and later | Defines the period of recording to the archive: |
x32: (X32)\Video | Layout | - | - | 4.7.3 and later | The key cannot be modified. |
x32: (X32)\Video | LH_Timeout | 5-2147483647 | 5 | 4.7.3 and later | Time in seconds on the expiry of which it is considered that there is no connection with Linux Hub. Default value - 5 seconds. Time interval is calculated by formula (LH_Timeout*1000/5) ms, for reconnections to Linux Hub: the more the value the more unlikely the video stream reconnects to LH. |
x32: (X32)\Video | ManualBrightnessControl | 0, 1 | 1 | 4.7.7 | Defines the way of brightness and contrast control for IP cameras: 1 - enable the manual brightness and contrast control; 0 - brightness and contrast are set in the camera interface. |
x32: (X32)\Video | MaxFrames | 500-10000 | 500 | 4.7.3 and later | Sets the number of frames in the file. |
x32: (X32)\Video | Missed | 0 - 2,147,483,647 | Depends on the "mode" parameter of the video capture card | 4.7.3 and later | Sets the video digitization rate. By default the rate is the same as for the video capture card. |
x32: (X32)\Video | Mobile | - | 0 | up to 4.7.6 | The key is not in use. |
x32: (X32)\Video | Monitor<monitor id>_cw | >=0 | 4.8.3 | Sets the number of cameras across (the "All cameras" button). | |
x32: (X32)\Video | monitor<monitor id>_ch | >=0 | 4.8.3 | Sets the number of cameras vertically (the "All cameras" button). | |
x32: (X32)\Video | monitor<monitor id>_w43 | >=0 | 4 | 4.8.3 | Sets the frame width (against the frame height). |
x32: (X32)\Video | monitor<monitor id>_h43 | >=0 | 3 | 4.8.3 | Sets the frame height (against the frame width). |
x32: (X32)\Video | NewCompressor | 0, 1 | 1 | 4.7.3 and later | Defines whether to use a new motionWavelet compressor: |
x32: (X32)\Video | NewMD | 0, 1 | 0 | 4.7.6 and later | Defines whether to use a new motion detection tool. |
x32: (X32)\Video | Noallcamsbutton | 0, 1 | 0 | 4.7.3 and later | Defines whether to show the "All cameras" button on the screen. |
x32: (X32)\Video | NoLayoutControl | 0, 1 | 0 | 4.7.5 and later | Disables F1 and F2 hotkeys (monitor ratio). |
x32: (X32)\Video | No_main_panel | 0, 1 | 0 | 4.7.3 and later | Defines whether to display control panel on the monitor. |
x32: (X32)\Video | Nosign | 0, 1 | 0 | 4.7.6 and later | Disables encryption of the digital signature to the frame. |
x32: (X32)\Video | OldDriver | KV1999 KV2000 KV2001 KV2002 KV2003 | Empty string | 4.7.3 and later | Support for old ISS cards. |
x32: (X32)\Video | Oldxeon | 0, 1 | 0 | 4.7.6 and later | Support for old Xeon processors. |
x32: (X32)\Video | Onevideoout | 0, 1 | 0 | 4.7.3 and later | Defines whether video outs are combined on the FS6 video capture card. |
x32: (X32)\Video | OnlyServerConnection | 0, 1 | 0 | up to 4.7.6 | If the video gate is a recording one, then it is possible to enter the archive mode by the short click. |
x32: (X32)\Video | Overlay | - | 1 | up to 4.7.6 | The key is not in use. |
x32: (X32)\Video | PostAlarmTime | >= 0 | 2 | 4.7.3 and later | Sets time (sec) on the expiry of which the alarm by detection tool on Axis IP cameras is not recorded. |
x32: (X32)\Video | PreCompress | 0, 1 | 1 | 4.7.3 and later | Defines whether to compress pre-recorded video. |
x32: (X32)\Video | PrintFontSize | Any | 0 | 4.7.3 and later | Sets the font size for printing. |
x32: (X32)\Video | PriorityClass | 256, 128, 32768, 32, 64 | 16384 | up to 4.8.0 | Defines the stream priority: 256 - realtime |
x32: (X32)\Video | Rbapp | - | - | 4.7.3 and later | Specifies the path to the app run by right-click in the monitor. |
x32: (X32)\Video | IndexRebuilding | 0, 1 | 0 | 4.7.6 and later | Is used when index is being rebuilt. If the system detects IndexRebuilding=1 at start, then index is immediately rebuilt without trying to read idx files. |
x32: (X32)\Video | ReCompressMedia | 0, 1 | 0 | from 4.7.3 to 4.9.0 | Defines whether to enable recompression of video from IP camera (recompress data from IP camera into wavelet). |
x32: (X32)\Video | Remote_delta | - | - | up to 4.7.6 | The key is not in use. |
x32: (X32)\Video | RestoreMode | 0, 1 | 1 | from 4.7.4 HOTFIX | Defines whether to quit the archive upon 10 minutes time-out. |
x32: (X32)\Video | ShowDate | 0, 1 | 0 | from 4.7.3 to 4.8.6, from 4.10.5 | Defines whether to show the date on the video (next to the time). |
x32: (X32)\Video | ShowID<Monitor_number> | 0, 1 | 1 | 4.9.0 to 4.10.1 | Defines whether to show the Camera ID on the button to open Camera context menu. Example: ShowID3=0 – the camera number will not be displayed in context men for the third Monitor. |
x32: (X32)\Video | ShowName<Monitor_number> | 0, 1 | 0 | 4.7.3 to 4.10.1 | Defines whether to show the Camera name on the monitor. |
x32: (X32)\Video | ShowTime<Monitor_number> | 0, 1 | 1 | 4.7.3 to 4.10.1 | Defines whether to show the Time on the monitor. |
x32: (X32)\Video | ShowTitle | 0, 1 | 0 | 4.7.3 to 4.10.1 | Defines whether to show the monitor name instead of the time on the control panel. |
x32: (X32)\Video | ShowButtons<Monitor number> | 0, 1 | 1 | 4.10.0 to 4.10.1 | Sets if the buttons of camera number are displayed on the Surveillance monitor <Monitor_number>. If the monitor number is not specified, the buttons are not displayed on all monitors. |
x32: (X32)\Video | ShowBorder<Monitor_number> | 0, 1 | 1 | 4.10.0 to 4.10.1 | Sets if the borders are displayed around the Surveillance monitor <Monitor_number>. If the monitor number is not specified, the border is not displayed on all monitors. |
x32: (X32)\Video | Sigma | - | 35 | up to 4.7.6 | Compressor setting. |
x32: (X32)\Video | SnapShotTime | > 0 | 1 | 4.7.3 and later | Sets time (sec) between snapshots. |
x32: (X32)\Video | Speaker | - | - | up to 4.7.6 | The key is not in use. |
x32: (X32)\Video | Threshold | - | 1500 | up to 4.7.6 | Compressor setting. |
x32: (X32)\Video | TMDCorrellation | 1-100 % | 30 | 4.7.6 and later | Permissible minimum similarity between frames when they are considered to coincide. 100% for completely identical frames. |
x32: (X32)\Video | TMDNonCorrectionStop | > = 0 | 1 | 4.7.6 and later | Number of incoming frames from PTZ camera upon STOP command; the decision to stop pointing (if there is no command to start motion) is made. |
x32: (X32)\Video | TMDSpeed | - | 3 | up to 4.7.6 | The key is not in use. |
x32: (X32)\Video | TMDSpeedCutoff | 0..∞ | 15 | 4.7.6 and later | Sets the limiting value of speed for camera with automatic centering. |
x32: (X32)\Video | TMDTolerance | - | 50 | 4.7.6 and later | Sets pointing accuracy (zone of tranquility). Corresponds to the value of area around stop point of PTZ camera (px). |
x32: (X32)\Video | UseConfigureByWeb | 0, 1 | 0 | 4.7.3 and later | Defines whether to use IP camera settings. When this key is enabled, the driver will try not to change parameters set on the camera. But behavior depends on specific camera+driver version+firmware combination. |
x32: (X32)\Video | UseCompression. | 0, 1 | 1 | 4.7.3 and later | Defines whether video compression is in use (UseCompression.camera ID). |
x32: (X32)\Video | UseLowRefFramesFpsFix | 0, 1 | 1 | 4.7.8 and later | Enables stream decompression with low key frame fps. Threshold fps value = 2. |
x32: (X32)\Video | VideoDumpMode | 0, 1, 2 | 0 | 4.7.8 and later | Sets the mode of video dump: |
x32: (X32)\Video | VideoDumpPath | - | Intellect/ FrameDump | 4.7.8 and later | Path to the folder where frames are stored. |
x32: (x32)\LMCGate | ExportFrequency | - | - | up to 4.7.6 | Sets time (sec) for updating buffer. |
x32: (x32)\LMCGate | EnableExport | 0, 1 | - | up to 4.7.6 | Defines whether frame buffer is enabled. |
x32: (x32)\LMCGate | ExportPath | - | - | up to 4.7.6 | Value is the path to the folder with exported frames. |
x32: (X32)\Video | AdaptiveStream | 0, 1 | - | 4.8.3HotFix |
The key can be used with multistream cameras only. 1 - video stream is transmitted over the network if video from this camera is required. If video is not displayed on the Client, then the there is no stream from the camera and the network is not loaded. Important! When the value of the key is 1, video is not recorded to the archive when the Video surveillance monitor is hidden. But recording is not stopped. In the result video archive fragment the period over which the Video surveillance monitor was hidden will look like a freeze frame. 0 - video stream is transmitted over the network regardless of whether video from this camera is required or not. |
x32: (X32)\Video | ExtractWidth | 0, 1 | - | 4.8.4 | 0 – partial decompression for MotionWavalet is disabled (stream from cameras is enhanced). 1 – partial decompression is enabled. |
x32: (X32)\Video | TelemetryMouseWheel | 0, 1 | - | 4.8.4 | 0 - digital image zooming and Telemetry zoom are performed using the mouse as described in ‘Intellect software package. Operator guide’. 1- digital zooming is performed scrolling the mouse wheel and pressing the Ctrl key. Telemetry zoom is controlled using the mouse wheel: when the wheel is scrolled, ZOOM_IN(ZOOM_OUT) commands are performed; the last mouse click performs ZOOM_STOP command. |
x32: (X32)\Video | ExportFontAdaptive | 0, 1 | - | 4.8.7 | The key sets the relative font size for titles (camera N and time) when the frame or archive fragment (since 4.10.5) is exported: 0 - by default (no key). The size of titles stays the same when the frame is exported (regardless of resolution). |
x32: (X32)\Video | ClientArchMessage | 0, 1 | - | 4.9.0 | The key is in to enable the following events for MONITOR object: ARCH_ENTER - enter the archive; |
x32: (X32)\Video | DrawDetectorNumbers | 0, 1 | - | 4.8.7 | 0 – identifiers of tracking objects are not displayed in the viewing tile (by default). 1 – identifiers of tracking objects are displayed in the viewing tile. |
x32: (X32)\Video | DrawDetectorColors | 0, 1 | - | 4.8.7 | The key sets the color of the frame that marks out the tracking object in the viewing tile: 0 – white color. 1 – the color is calculated as the mean value in the area marked out with a frame. |
x32: (X32)\Video | FaceCamOffset | >0 | 50000 | from 4.8.8 to 4.9.7 | The key specifies the max. possible camera identifier in the system. The bigger values are used for the face detection tool. |
| 2147483648 | from 4.9.8 | ||||
x32: (X32)\Video | FontCamNameHeight | >=10 | 10 | 4.8.8 | The key specifies the font size of the camera name when displaying it on the Video surveillance Monitor. |
x32: (X32)\Video | FontCamTimeHeight | >=10 | 10 | 4.8.8 | The key specifies the font size of the camera time when displaying it on the Video surveillance Monitor. |
x32: (X32)\Video | ShowFileNameInTitles | 0, 1 | 0 | 4.9.0 | The key is used to add the name of the file to the titles using the virtual video device: 0 - the name of the file is not shown in the titles; 1 - the name of the file is shown in the titles (the Captioner object is to be created). |
x32: (X32)\Video | CorrectFrameNumber | 0, 1 | 1 | 4.9.0 | 1 – key redefines frame numbers when archive is played back by Axxon_player.exe if frames are recorded to the archive with incorrect number. 0 – key in not active, frames are played in the order corresponding to their numbers in archive. |
x32: (X32)\Video | DisappearedAlarmDuration | >0 | 15 | 4.9.0 | Key specifies time-out in seconds after which “Disappearance in zone” detection alarm is discarded. |
x32: (X32)\Video | LongInZoneTimeout | >0 | 10 | 4.9.0 | Key specifies time-out in seconds which defines the duration of object appearance in zone, after which “Appearance in zone more than 10 sec” detection tool triggers. |
x32: (X32)\Converter | CheckCompressedSize | 0, 1 | 1 | The key allows decreasing time of exporting video in the avi format using the Converter.exe. utility. If the key value is 0, then resolution check is disabled when exporting video in the avi format. If resolution check is disabled, then frames are not decompressed when being exported, but when resolution is changed, video artifacts can appear. | |
| x32: (X32)\Video x64: (x64)\Video | FastPlayMpegSkip | 0, 1 | 1 | 4.9.0 to 4.9.7 | The key enables frame skip when there is fast playback of the archive in the h264 format. 0 – frame skip is disabled. If the fps value comes up to 50, the frame skip will be enabled regardless of the FastPlayMpegSkip key. 1 – only key frames are played back. 2 (only 4.9.7) – frame skip at fast playback is disabled regardless the fps value. Note. It is also possible to configure frame skipping while playing back the archive – see also info on MonitorSkipArchFramesEnable registration key. |
| x32: (X32)\Video x64: (x64)\Video | MonitorFrameBuffer | >=0 | - | 4.8.2 | The key specifies the number of frames to buffer when displaying live video from IP cameras. The value of 5 is recommended. |
| x32: (X32)\Video x64: (x64)\Video | BoardFX4MaxChannels | 0, 1 | 0 | 4.9.0 | The key enables channel limitation for FX4 card. 1 – the limitation is enabled. It is not possible to set the channel number that is bigger than it is provided by the card. 0 or no key – the limitation is disabled. |
| x32: (X32)\Video x64: (x64)\Video | BoardFS6MaxChannels | 0, 1 | 0 | 4.9.0 | The key enables channel limitation for FX6 card. 1 – the limitation is enabled. It is not possible to set the channel number that is bigger than it is provided by the card. 0 or no key – the limitation is disabled. |
| x32: (X32)\Video x64: (x64)\Video | TelemetryZoomStopTime | >0 | 1000 | 4.9.1 | The key specifies the value of optical zoom duration (delay) in milliseconds. |
| x32: (X32)\Video x64: (x64)\Video | OnvifCompatibilityMode | 0, 1 | 0 | 4.9.1 | The key is for operaton of cameras via the ONVIF protocol in the compatibility mode. It is used when the ONVIF protocol is partially supported by the camera. The key enables the compatibility mode for all cameras in the system. |
| x32: (X32)\Video x64: (x64)\Video | TelemetryPointAndClickDelay | >0 | 500 | 4.9.2 | Sets the interval (in milliseconds) between sending Point&Click commands when controlling PTZ via surveillance monitor by clicking and holding left mouse button and the Ctrl key. See details in Operator's Guide. |
| x32: (X32)\Video x64: (x64)\Video | m_nCurVolume[FS] | >=0 | 0 | 4.7.6 | The parameter is used for loop recording of Server archive in order to store the number of current disk for recording. The figures in ascending order correspond to the letters of the sections (e.g., 0=C, 1=D, 2=E etc.). If the parameter has not been created, then it is created at the moment of selecting the disk for recording the archive with the value of disk number which has the latest recorded archive fragment. When filling the disk, the parameter increases by 1. |
| x32: (X32)\Video x64: (x64)\Video | m_dwTime[FS] | Date in YYYY.MM.DD.HH.MM.SS format | 1970.01.01.03.00.00 | 4.7.6 | The parameter is used for loop recording of Server archive. If the parameter has not been created, then it is created at the moment of selecting the disk for recording with the default value. When going to the new disk, the parameter value changes as follows:
The recording will be performed on the current disk until the file with the date specified in the m_dwTime[FS] key becomes an old one on this disk (if the disk wasn’t primarily empty) or until the remaining free space on the disk becomes equal to that specified by the user (if the disk was primarily empty, see The settings panel for the Video subsystem section). Further the system will erase this file and go to the next disk. |
| x32: (X32)\Video x64: (x64)\Video | m_nCurVolume[ARCH] | >=0 | 0 | 4.7.6 | The parameter is used for loop recording of Backup archive. The parameter is similar to the m_nCurVolume[FS] parameter. |
| x32: (X32)\Video x64: (x64)\Video | m_dwTime[ARCH] | Date in YYYY.MM.DD.HH.MM.SS format | 1970.01.01.03.00.00 | 4.7.6 | The parameter is used for loop recording of Backup archive. The parameter is similar to the m_dwTime[FS] parameter. |
| x32: (X32)\Video x64: (x64)\Video | ResetFastPlay | 0, 1 | - | 4.9.2 |
The key is not created by default, i.e. the value is 0. The key defines the playback speed if the playbeck is paused and then resumed at fast archive playback: 0 – playback will be resumed with the same speed as before pause. 1 - playback will be resumed with normal speed. |
| x32: (X32)\Video x64: (x64)\Video | TelemetryMouseZoom | 0, 1 | 1 | 4.9.2 | The key allows disabling the control of optical zoom function by mouse buttons. 0 – control of optical zoom by means of long pressing of left or right mouse buttons is not functioned. 1 - control of optical zoom by means of long pressing of left or right mouse buttons is functioned. |
| x32:(X32)\Video\RTSPTimeout x64:(x64)\Video\RTSPTimeout | < camera manufacturer > | 0-100 | 10 | DriverPack 3.2.26.1489 and later | Sets max. time interval at the end of which the following frame is sent through the video gate. Example: in order to limit the frame rate (to 0,01) of the stream transmitted through the video gate using the RTSP protocol, the "RTSP" parameter is to be created with value 100. |
| x32: (X32)\Video x64: (x64)\Video | UnlimitMonitorSize | 0, 1 | 0 | 4.9.3 | When the value=1, the key removes restrictions on the Monitor height and width. When the large size (more than 900%) is set for the Monitor window, then proper operation of Intellect is not guaranteed. |
| x32: (X32)\Debug x64: (x64)\Debug | ShowDisplayingFps | 0, 1 | 0 | 4.9.3 | When the value = 1, the key enables displaying information on fps in the first line of captions on the video image in the Viewing tile. Note. If the debug mode is enabled, the fps of the digitized video signal is displayed on the Monitor (see Frame rate settings), i.e. the key allows comparing these values. The Camera-based Captioner object is to be created in order to use this function. |
| x32: (X32)\Video x64: (x64)\Video | StartPlayFromPFrame | 0,1 | 1 | 4.9.3 | After using frame-by-frame reverse playback, when returning to the normal playback mode: 0 – playback starts from the nearest previous key frame. 1 - playback starts from the nearest previous key frame (difference, R frame). |
| x32: (X32)\Video x64: (x64)\Video | UseServerTime | Comma-separated IDs of cameras in Intellect, or * Note. Use all instead of * value in versions up to 4.9.8 | - | 4.9.3 | Camera sets time of frame while video image transmission after which frames playback by turn depending on the time of frame. Sometimes camera sets incorrect time, so frames playback in invalid order because of bad communication quality or time of camera is not synchronized with server. The key sets list of IP-cameras for which time of frame will be set according to system time of the Intellect server while reading frames from the network. Note. The key can be used for cameras with absolute time (e.g. Tattile cameras). Other cameras synchronize with server time on default. Example. When the value of registry key is “1,10,135”, time of Server will be applied on cameras 1, 10 and 135. If value of key is * then server time will be applied for all cameras. In Intellect 4.10.0 and later this value is considered as the value by default and is in use if the key is not created. |
| x32: (X32)\Video x64: (x64)\Video | MxpegResetCounter | >=0 | 13 | 4.9.5 DP 3.2.30 | The key sets the number of key frames decompressed by MxPEG decompressor before they are returned. The waiting period of specified frames is 3 minutes, on the expiry of this period the decompressor is reinitialized. The key is in use if there is no video in Intellect when MxPEG codec operates with MxPEG decompressor. In this case the value of the key is to be reduced. |
| x32: (x32)\Video x64: (x64)\Video | TelemetryMouseAlternative | 0, 1 | 1 | 4.9.5 | 0 – previously used Mouse PTZ control mode is in use. 1 – a new Mouse PTZ control mode is in use. See Mouse PTZ control. |
| x32: (X32)\Video x64: (x64)\Video | TelemetryLineColor | 4-byte RGB value Most significant byte - 4 = 0. byte 3 - R (0..255) byte 2 - G (0..255) byte 1 - B (0..255) Examples: blue color: LetterboxBackgroundColor = 255 white color: LetterboxBackgroundColor = 16777215 | 16777215 (white color) | 4.10.4 | The key sets the color of the crosshair and the arrow line during PTZ control. See Mouse PTZ control. |
| x32: (x32)\Video x64: (x64)\Video | ContinousMode | Identifiers of cameras, divided by comma, for which continuous PTZ mode is enabled. Example: 2,3,1 | - | 4.9.5 | In the Continous mode camera lens is re-focused slowly – arrow indicating the re-focus direction smoothly follows the pointer. To use the Continous mode, the camera is to support this mode. In discrete mode (if the camera number is not specified in the key) re-focus of the camera objective depends on the area of the mouse click. |
| x32: (x32)\Video x64: (x64)\Video | MonitorSkipArchFramesEnable | 0, 1 | 0 | 4.9.0 to 4.9.4 | The key enables frame skipping while playing back the archive. 0 – all frames are displayed. If there is lack of resources, video delays and loss of synchronization with sound are possible, and the playback speed can be increased no more than 4 times (or no more than 60 fps). 1 – Depends on the version of Intellect:
|
| 1 | from 4.9.5 to 4.9.7 from 4.10.1 | ||||
| x32: (x32)\Video x64: (x64)\Video | TempWritingDir | Path to a folder | - | 4.9.6 - 4.9.7 | The key specifies the path to the existing folder that will be used as a buffer while recording to the archive, e.g., C:\Temp. Temporary files with the name in the writing._<camera_id> format are created in the specified folder while recording. If the key hasn’t been created, then such temporary files are created in the VIDEO folder on a disk with the archive. Important! When 64-bit modules are in use (see Configuring of using 64-bits modules) the key is ignored by the system and temporary files are created in RAM. When the recording is completed these files are renamed and moved to the folder with the archive according to the rules of archiving (see General information on video archiving). This key can be used when, for example, the archive is recorded to the net disk, but disk performance is not enough and it can’t record new files and/or delete previous recordings recorded on loop. If in the key the path to a non-existing folder or a folder created after starting Intellect is specified, then the buffer is not in use. In the TempWritingDir folder there must be MORE free space, than maximum size of temporary files that are stored in it, i.e. the folder must NEVER be filled for 100%. There should be not less than 100 Mb of free space in TempWritingDir folder. To improve performance of data copying from TempWritingDir to NAS create TempWritingDir folder in RAM using special software, for example SoftPerfect RAM disk. |
| x32: (X32)\Video x64: (x64)\Video | MpegWritingQueueSize | >0 | - | 4.9.6-4.9.7 | These keys are used along with TempWritingDir key (see above). They specify the number of frames stored in RAM until data is stored in the buffer for Mpeg and MJpeg codecs respectively. This is necessary for frames not to be lost while copying files from the buffer to the main archive when the disk is full. Values of the keys are to be selected experimentally as they depend on the number and type of cameras as well as on NAS. The values are to be changed at 100 rate. |
| x32: (X32)\Video x64: (x64)\Video | MJpegWritingQueueSize | >0 | 25 | 4.9.6-4.9.7 | |
| x32: (X32)\Video x64: (x64)\Video | ResetOSDLine | 0, 1 | 0 | 4.9.7 | The key is for enabling and disabling titling on the video image using the SC590N4 video capture device. 0 – OSD-captions of device are in use. 1 – OSD-captions of device are not in use. Note. Restart of operating system can be required to apply settings while changing the key value. |
| x32: (x32)\Video x64: (x64)\Video | WritingQueueSize | >0 | x32: 100 x64: default value is a maximal video length in frames (on default 500) | 4.9.8 | The key sets number of frames storing in RAM until start of data record to buffer. The key can be used with any codec. Note. The key replaces MpegWritingQueueSize and MJpegWritingQueueSize keys (see above). Existing values of keys will be read while updating and the maximal value of them will be assigned to the WritingQueueSize key and old keys will be removed. If specified keys are not created, the default value will be assigned to the WritingQueueSize key. |
| x32: (x32)\ x64: (x64)\ | ClearProtocolFromCurrentTime | 0, 1 | 0 | 4.9.8 | The key is for changing the way of deleting archive of events at the end of storage period (see Configuring events logging): 1 – storage period is counted from the current PC time. So if there are events "from the future" (date of which is later than the current date) in the archive of events, they are neither taken into account when deleting old entries nor deleted. 0 – storage period of records is counted from the date of creation the newest record. Note. Deletion is performed at 00:00:00 in case of active license. |
| x32: (x32)\Video x64: (x64)\Video | MemFile | -1, 0, 1 | -1 | 4.9.8 | The key specifies the way of archive record to disk or network storage: 0 – each frame is recording to disk at once. This value is not recommended to use for network storages. 1 – at first video is recording to RAM (default video size is 500 frames, it's specified by the Ring parameter on the Settings panel of the Video subsystem section of the Tweaki.exe utility), temporary files are not created. Video will record on disk after its completion. When the recording ends, it is written to the disk in parts, the size of which is set by the WriteBufferSize parameter (1 MB by default). Memory consumption is highly increasing in this case. -1 – video is recording to disk by pieces in size 1 Mb. This way is optimal when recording to disk or network storage and memory consumption is minimal. |
| x32: (X32)\Video x64: (x64)\Video | WriteBufferSize | >0 | 1 | 4.9.8 | The key specifies the size of video data chunk that is written to the disk at a time, in megabytes. If the frame size is less than the preset value, then it "merges" with the next one. The key is used when the value of the MemFile key is 1 or -1. Note. See WritingQueueSize. |
| x32: (X32)\Video\AVI x64: (x64)\Video\AVI64 | SubtitlesFontSize | 8 – 48 | - | 4.9.0 | Font size of captions with camera name and time while export from the Monitor. Note. Captions overlaid using the Captioner object are configured separately on the settings panel of the Captioner object. |
| x32: (x32)\Video x64: (x64)\Video | TelemetryArrowLen | 0 – 100 | 50 | 4.9.8 | The key specifies length of the arrow displayed on the video image at mouse PTZ control from the Monitor window. Arrow length is set in percent and counting from the end. |
| x32: (x32)\Video x64: (x64)\Video | TelemetryStopZone | 2 – 100 | 50 | 4.10.0 | The key sets the size of the zone in the center of the video where PTZ control functions using mouse are disabled. The less the key value the bigger the “dead” zone. The default value corresponds to the size of the cross in the center of Surveillance monitor during PTZ control. |
| x32: (x32)\Video x64: (x64)\Video | ShowTelemetryCross | 0, 1 | 1 | 4.10.0 | The key is designed to enable and disable showing a cross in the center of Surveillance monitor during PTZ control. 1 – the cross is shown in the center of Surveillance monitor during PTZ control. 0 – the cross is not shown in the center of Surveillance monitor during PTZ control. |
| x32: (x32)\Video x64: (x64)\Video | GreenStreamUpdateTimeoutMS | >0 | 20000 | 4.10.0 | The key sets time in milliseconds that equals to stream scan rate in order to optimize connection parameters. This key can be active only if the Video stream setting checkbox is checked (see Configuration of multistream video). |
| x32: (x32)\Video x64: (x64)\Video | TitlesOnlyArchive | 0, 1 | 0 | 4.10.0 | The key is designed to enable saving titles separately from video. 1 – titles are saved in files of *.t01 type separately from video. If there is time stamp in the titles, then these titles are not displayed in live video, but can be seen in the archive (for the corresponding period of time). Titles with no time stamp are displayed on live video 0 – titles are saved with video and are displayed on live video. |
| x32: (x32)\Video x64: (x64)\Video | ExportDirFixed | 0, 1 | 0 | 4.9.9 | The key allows forbidding change of export catalogue when the archive period is exported and when the archive is exported using the AviExport utility. 1 – export catalogue change is forbidden. 0 – export catalogue change is allowed. |
| x32: (x32)\Video x64: (x64)\Video | ShowBookmarkButtons | 0, 1 | 1 | 4.10.1 | The key is used to disable creating and editing of bookmarks meant for protection against video rewriting (see Create a bookmark). 1 – show Create and View bookmarks buttons. 0 – hide Create and View bookmarks buttons. |
| x32: (x32)\Video x64: (x64)\Video | ShowExportButtons | 0, 1 | 1 | 4.10.1 | The key is used to disable export of bookmarks meant for protection against video rewriting (see List of bookmarks). 1 – show bookmark export button. 0 – hide bookmark export button. |
| x32: (x32)\Video x64: (x64)\Video | ResizePrintingFrame | 0, 1 | 0 | 4.10.1 | The key sets the width of frame for printing: 1 – the frame is printed out so that is fits the full width of the page depending on the default layout (portrait or landscape). 0 – the frame is printed out not on the whole page. |
| x32: (x32)\Video x64: (x64)\Video | CycleByLayouts | 0, 1 | 0 | 4.10.1 | The key enables paging by layouts. 0 – standard paging. 1 – paging by layouts. |
| x32: (x32)\Video x64: (x64)\Video | EnableCodecSettings | 0, 1 | 0 | 4.10.1 | The key is in use for enabling compressor and decompressor on the settings panel of the Camera object. 0 – Compressor and Decompressor parameters are not available for changing. 1 – Compressor and Decompressor parameters are available for changing. |
| x32: (x32)\Video x64: (x64)\Video | PerspMaxObjects | >0 | 10 | 4.10.1 | The key sets maximum calibration objects and background points that can be used when configuring perspective for the Tracker object (see Configuring perspective). |
| x32: (x32)\Video x64: (x64)\Video | VirtualGrabberSortMode | 0, 1, 2 | 0 | 4.10.1 | The key sets the order of playing back files when the virtual grabber is in use: 0 – sorting by the latest modification.1 – sorting by name (lexicographic). 2 – sorting by creation time. |
| x32: (x32)\Video x64: (x64)\Video | SplitArchiveIntervals | >0 | 5000 | 4.10.1 | The key is responsible for merging fragments when requesting the range of available archive recordings via HTTP API (see Ranges of available archive recordings). The interval is set in milliseconds. If the time between recordings is less than specified one, then recordings are merged into one. |
| x32: (x32)\Video x64: (x64)\Video | NotifyAbout_arch_days | 0, 1 | 1 | 4.10.2 | The key allows disabling the warning when the Store no less than parameter is set for more than 30% of cameras in the system (see also The Settings panel of the Camera object). |
| x32: (x32)\Video x64: (x64)\Video | archrecrestart | 0, 1 | 0 | 4.8.3 to 4.10.3 | Enables restarting record on archive entering. 1 – patch that has been recorded on archive entering is stopped and a new one starts. As a result the user who enters the archive sees a freeze frame corresponding to that on exiting. 0 – recording is not stopped on archive entering The key is to be created on a Server. |
| x32: (x32)\Video x64: (x64)\Video | MonitorArchPrevTimeSeconds | >=0 | -1 | 4.10.4 | Enables restarting record on archive entering and sets time period in seconds (0 or more) to roll back from current time at archive entering and start playback from. All frames are forced to be recorded to the disk at archive entering, taking into account the pre-alarm recording. -1 – disabled (by default). Note. The key is to be created on a Server. If the key is set to "0", it works in the same way as archrecrestart set to 1 (see above). If "1", "2", etc. is set, the key works in the same way as archrecrestart set to 1 , plus the time for positioning in archive is set. Note. If every 20th frame is a key frame, entering archive can take up to 2-4 sec., as all frames are warranted to be recorded on disk yet it is possible only if the key frame for the next clip is received in order to avoid gaps in the archive. |
| x32: (x32)\Video x64: (x64)\Video | archenterpause | 0, 1 | 0 | 4.8.3 | Enables pausing playback on archive entering. 1 – the Pause button is pressed on archive entering, archive navigation using arrow keys. 0 – the Pause button is not pressed on archive entering. The key is to be created on a Server. |
| x32: (x32)\Video x64: (x64)\Video | FastIndex | 0, 1 | 0 1 | 4.9.9 - 4.10.2 4.10.4 and later | The key enables fast index download. It is in use for 64-bit modules only as memory usage increases while reading and saving. Non-depending on the key value the fastIndex.index file is created in the VIDEO folder - using this file indexes are downloaded much faster. 0 – when Intellect is started all indexes are downloaded, so no time is wasted for data loading. 1 – when Intellect is started the specified file is downloaded and data on detailed index for an hour will be loaded if required. |
| x32: (x32)\Video x64: (x64)\Video | LButtonClickContinuousPlayEnable | 0, 1 | 0 | 4.10.3 | The key changes the playback by alarms control mode in the Video surveillance monitor: |
| x32: (x32)\Video x64: (x64)\Video | MonitorPlaybackControlByMouseWheel | 0, 1 | 0 | 4.10.3 | The key enables control of the playback speed of the archive in the Video surveillance monitor and pausing/resuming playback using the mouse wheel. 0 - playback speed control using the mouse wheel is possible only when the cursor is hovered over the playback control panel. When hovering the cursor over the video, the mouse wheel controls the zoom. Clicking on the mouse wheel is used to control the telemetry (autocentering). 1 - playback speed is adjusted using the mouse wheel while hovering the cursor over the Surveillance window. Clicking the mouse wheel pauses/resumes video playback. Note. See Video playback controls section in Operator's Guide. |
| x32: (x32)\Video x64: (x64)\Video | ConnectOnlyByClient | 0, 1 | 0 | 4.10.3 | The key disables video data transmission from the Server to the Videogate when video data via this Videogate is not requested on the Clients. The key is to be created on the computer under which the Videogate object is created. 0 - video is transmitted from the Server to the Videogate constantly. 1 - video is transmitted from the Server to the Videogate when video data via this Videogate is requested on the Client. If recording to Videogate archive is configured, then to disable video data transmission from the Server to the Videogate, when they are not requested on the Clients, the Active cameras recording checkbox is to be set checked on the settings panel of the Videogate object (see Configuring the record of the Videogate module archive). If this checkbox is set unchecked and recording to the Videogate archive is configured, then video data is transmitted to the Videogate constantly. |
| x32: (x32)\Video x64: (x64)\Video | MaximizeCameraOnDblClk | 0, 1 | 0 | 4.10.3 | The key enables transforming the Surveillance window into the single layout mode by left double-clicking. The key is created on the computer where the video is displayed and the described behavior of the video surveillance monitor is required. |
| x32: (x32)\Video x64: (x64)\Video | MinimizeCameraOnDblClk | 0, 1 | 0 | 4.10.3 | The key is used together with the MaximizeCameraOnDblClk = 1 key and it enables returning to the original layout after enlarging the video surveillance window by left double-clicking. The key is created on the computer where the video is displayed and the described behavior of the video surveillance monitor is required. 0 - returning to the original layout is performed by right double-clicking the Surveillance window. 1 - returning to the original layout is performed by left or right double-clicking the Surveillance window. |
| x32: (x32)\Video x64: (x64)\Video | UseOneClkToMaximizeOrMinimizeCamera | 0, 1 | 0 | 4.10.5 | The key is valid only if both keys MaximizeCameraOnDblClk and MinimizeCameraOnDblClk are set to 1. Enables the enlargement and reduction of the Surveillance window with one left or right mouse click: 0 – enlargement of the Surveillance window and return to the original layout by double-clicking the left or right mouse button. 1 – enlargement of the Surveillance window and return to the original layout by one left or right mouse click. |
| x32: (x32)\Video x64: (x64)\Video | ContourAlways | *, all, IDs of cameras, comma-separated | - | 4.10.3 | The key enables permanent outlining of moving objects on the video from the specified video cameras on all Video surveillance monitors to which it is added. The key is not created or created with an empty value - outlining is enabled by the Operator in the Surveillance window (see Outlining of moving objects). * or all - the permanent outlining of moving objects on all video cameras in on all Video surveillance monitors is enabled. Camera identifiers comma-separated (for example, "1,2,4") - permanent outlining of moving objects is enabled for cameras with the specified identifiers. |
| x32: (x32)\Video x64: (x64)\Video | savemode | 0, 1 | - | 4.10.3 | The key allows not changing the video surveillance mode of the active camera (archive or live video) when changing the layout and adding or removing cameras to the Video surveillance monitor. 0 - when adding a new camera to the Video surveillance monitor and when removing cameras from it, the active camera switches into the live video viewing mode. 1 - when adding a new camera to the Video surveillance monitor and removing the cameras from it, the active camera does not change the video surveillance mode (archive or live video). |
| x32: (x32)\Video x64: (x64)\Video | clean_object_lists | 0, 1 | 0 | 4.10.4 | The key defines if it is necessary to delete cameras from Video Surveillance Monitor list when the Camera object is deleted. 1 – the Camera is deleted from the Monitor list on deletion. 0 – the Camera is not deleted from the Monitor list on deletion. If the Camera object with the same ID is created again, it automatically appears in the Monitor list. |
| x32: (x32)\Video x64: (x64)\Video | ShowDisconnectState | 0, 1 | 0 | 4.10.4 | The key enables displaying a message about a connection failure instead of the last frame received. 0 – When the connection to the camera is lost, the last received frame is displayed in the Surveillance window. 1 – When the connection to the camera is lost, an image showing the disconnected state is displayed in the Surveillance window. |
| x32: (x32)\Video\Deinterlace x64: (x64)\Video\Deinterlace | monitor_id.camera_id, e.g. 4.1 – camera 1 on monitor 4. | 1, 2 | - | 4.10.4 | The key sets deinterlacing mode for the specified camera. By default, the key is not created and mode 1 is in use. In case if it is not productive enough, for example for Paxton intercoms, use mode 2. |
| x32: (x32)\Video x64: (x64)\Video | MonitorMultiDecompress | 0, 1 | 1 | 4.10.4 | The key enables decompression of video on all available cores of the processor, thereby increasing the speed of video playback. 0 - Video decompression is performed on one core of the processor. 1 - Video decompression is performed on all available processor cores. Note. If Clients are present in configuration, set the key both on Intellect Server and Client side. |
| x32: (x32)\Video x64: (x64)\Video | DisableReplaceCam | 0, 1 | 0 | 4.10.4 | The key can be created to prohibit moving the Video Surveillance Windows on the layout in the Video Surveillance Monitor (either when the Control Panel is enabled or disabled). 0 – changing the position of the Video Surveillance Windows on the layout is allowed. 1 – changing the position of the Video Surveillance Windows on the layout is prohibited. |
| х32: (X32)\Video x64: (x64)\Video | EnterEdgeStorageDirect | 0, 1 | 0 | 4.10.4 and later | The key enables the user redirection to the "edge storage" after pressing the Enter archive button. 0 - after pressing the Enter archive button, the user is redirected to the video archive. 1 - after pressing the Enter archive button, the user is redirected to the "edge storage" if there is one, and if it is connected to the camera in the Video Monitor. The key should be specified on those computers where this option is required. |
| 4.10.5 and later | The key ALSO enables the user redirection to the external archive on pressing the Tab hotkey in the Video Monitor. | ||||
| х32: (X32)\Video x64: (x64)\Video | TouchScreeenUpdateTimeout | > = 0 | 0 | 4.10.5 and later | The key sets the Play button hold time in milliseconds to enable the continuous video archive playback on the touch screen. |
| х32: (X32)\Video x64: (x64)\Video | ShowNoDiscIconInMonitor | 0, 1 | 1 | 4.10.5 and later | Using this key you can hide the "no disk" icon from being displayed in the Monitor if no disk is selected for recording. 0 – if no disk is selected for recording, the "no disk" icon is not shown. 1 – if no disk is selected for recording, the "no disk" icon is shown in the Monitor. Note. You should use this key on all computers where the "no disk" icon has to be hidden from being displayed in the Monitor. |
| х32: (X32)\Video x64: (x64)\Video | DisableTelemetryOnDeactivate | 0, 1 | 0 | 4.10.5 | 0 – if enabled, PTZ control remains active after you hide its window or switch to another screen. 1 – if enabled, PTZ control becomes inactive after you hide its window or switch to another screen; you can re-activate it manually. Refer also to Mouse PTZ control. |
| x32: (x32)\Video x64: (x64)\Video | nosynt | 0,1 | 0 | 4.10.5 | This key disables ActiveX's (refer to CamMonitor.ocx ActiveX Control) video stream recalculation to fit the display window and forces video display in its native resolution. Therefore, when you export a frame from an ActiveX window called from the Event Log or the Web Reports subsystem, you'll get full resolution frame from either live video or stored footage. 0 – ActiveX optimizes the video resolution to its window size. 1 – ActiveX displays video in its native resolution. |
| x32: (x32)\Video x64: (x64)\Video | ApplyChinaEastWestFix | 0, 1 | 0 | 4.10.5 | This key allows flipping the camera icon on the map while you rotate it. 0 – standard behavior. 1 – the Map receives panning value as CAM|XXXX|UPDATE_ABSOLUTE which flips the camera icon while you rotate it. |
| x32: (x32)\Video x64: (x64)\Video | UseNuma | 0, 1 | 0 | 4.10.5 | This key affects the allocation of virtual memory in multi-CPU systems. 0 – uniform allocation of virtual memory. 1 – NUMA allocation for optimal distribution of CPU load between multiple CPUs within a PC. Note. Before changng this key, please consult your AxxonSoft manager. |
| x32: (x32)\Video x64: (x64)\Video | MonitorForwardSkipSpeed | >0 | 12 | 4.10.4 and later | The key operates together with the MonitorSkipArchFramesEnable key (see above). It enables the accelerated playback on reference frames after the specified speed during the 1-camera playback. If the odd number is set as the key value, then the accelerated playback on reference frames will start at an even speed, minus 1 from the entered number. |
| x32:(x32)\Video\FileSystem x64:(x64)\Video\FileSystem | FileReader.MMF | 0, 1 | 0 | 4.10.4 and later | 0 - during the playback, the video archive fragments are read into RAM by one frame. 1 - during the playback, the video archive fragments are read into the RAM all at once. |
| x32: (x32)\Video\FileSystem x64: (x64)\Video\FileSystem | FileSystem.NotifyCoreFrameSkipped | 0, 1 | 1 | 4.10.5 and later | The key enables FRAME_SKIPPED event (see CAM) 0 – the FRAME_SKIPPED event is not generated, core load is reduced. 1 – the FRAME_SKIPPED is generated, there is a risk of buffer overflow. |
| x32: (x32)\Video x64: (x64)\Video | NoSaveTitles | 0, 1 | 0 | 4.10.5 | The key disables storing captions in the captions database: 0 – the captions are saved in the captions DB. 1 – the captions are not saved in the captions DB. |
| x32: (x32)\Video x64: (x64)\Video | <Grabber name.MaxChannels> For example: RTSP.MaxChannels, HikVision(h.264).MaxChannels Note. Both new and old grabber names are supported. The comparison is case sensitive. | >0 | - | 4.10.4 and later, and DP 3.52.2423 and later | The key sets the maximum number of camera channels under the manually created Video Capture Device object for the specified device (grabber). By default, the maximum number of channels is 64. |
| x32: (x32)\Video x64: (x64)\Video | MaxSpeedValue | Integer | - | 4.10.5 | The key sets the limit on the maximum archive playback speed in the Video Surveillance Monitor both forward and reverse. Examples of values: With a value of 6, the maximum possible playback/rewind speed is x6. |
| x32: (x32)\Video x64: (x64)\Video | DecompressorTimeout | >0 | 30 | from 4.10.5.3952 to 4.10.5.3958 | Sets the time period in milliseconds that the decompressor is allowed to spend on decompression of 1 frame. If the time is exceeded, frame drops begin. |
| x32: (x32)\Video x64: (x64)\Video | DecompressorQueue | >0 | 30 | from 4.10.5.3958 to 4.10.5.4075 | Sets the size of the display buffer in frames. For example, with the default value, frame skipping begins if there are more than 30 frames in the display queue for a channel. |
| - | from 4.10.5.4075 | Only works when DecompressorQueue.ByTime=0 (see below) | |||
| x32: (x32)\Video x64: (x64)\Video | DecompressorQueue.ByTime | >=0 | 1500 | from 4.10.5.4075 | Sets the time period in milliseconds for the display buffer. Set DecompressorQueue.ByTime=0 to specify buffer size in frames with the DecompressorQueue key. |
| х32: (x32)\Video x64: (x64)\Video | StopAllButCurrent | >=0 | 0 | from 4.10.5 | The key adjusts the automatic switching of video streams when changing the number of Video Surveillance Windows in the Video Surveillance Monitor: 0 - if you change the number of video surveillance windows in the Video Surveillance Monitor using the control panel or hot keys, the stream for non-displayed cameras is no longer requested from the server, but the streams are not turned off while a gradual overlap (enlarging by double-clicking). 1 or more - unused streams are disabled both with a gradual overlapping of the Video Surveillance Windows, and with a change in the number of Video Surveillance Windows in the Video Surveillance Monitor using the control panel or hot keys. |
| x32: (x32)\Video x64: (x64)\Video | TT_INITIAL | >0 | 1000 | from 4.10.5 | Sets the time period in milliseconds that must elapse after the mouse cursor hovers over a control in the Video Surveillance Monitor for a tooltip to appear. |
| x32: (x32)\Video x64: (x64)\Video | TT_AUTOPOP | >0 | 5000 | from 4.10.5 | Specifies the time period in milliseconds during which a tooltip is displayed in the Video Surveillance Monitor. |
| x32: (x32)\Video x64: (x64)\Video | hardcoded_hyperlink | URL address | - | from 4.10.5 | Sets the constant part of the link in the device Web interface home page address. If the key is set, the address of the Web interface looks like: hardcoded_hyperlink/<cam_id>. For example, the key is "http://locallhost/". When you go to the IP device’s Web interface from the settings panel of the Camera 1 object, the browser will open the address http://locallhost/1 |
| x32: (x32)\Video x64: (x64)\Video | syncing_cams_max_number | >0 | 10 | from 4.10.5 | The key is in use with the importing from edge storages function. It determines the maximum number of cameras, the archive of which is synchronized after reconnecting to the Server. Reduce the key value if after reconnection with the Server there are gaps in the archive due to HD write queues. |
| x32: (x32)\Video x64: (x64)\Video | IpStorageSyncDepthHours | >0 | 24 | from 4.10.5 | Specifies the time, in hours, for which the archive is to be imported from edge storage. For example, if the last synchronization was performed 34 hours ago, and the key is set to the default value of 24, then after restoring the camera’s connection with the server, the archive will synchronize for only 24 hours. Note. The last synchronization time is set by the SyncedTime parameter in the Settings.xml file. |
| x32: (x32)\Video x64: (x64)\Video | MonitorSynchronizedFrameBuffer | >=0 | - | from 4.10.5 | Sets the number of decompressed frames in the buffer during synchronous archive playback. The key must be used if live video fps decreases during synchronous archive playback. 0 – buffering of decompressed frames during synchronous archive playback is disabled. > 0 – buffering of decompressed frames during synchronous archive playback is enabled. |
| x32: (x32)\Video x64: (x64)\Video | Video.ThreadAffinity.Main.CoreCPU | >=0 | 0 | from 4.10.5 | Sets the number of the CPU core, for which the main thread of the Intellect software application is assigned. 0 – the core is not assigned to a thread; it can be used by other threads. >= 0 – the core is assigned to the thread and excluded from use by other threads. |
| x32: (x32)\Video x64: (x64)\Video | MonitorUpdateInterval | >0 | - | from 4.10.5 | The key sets the update interval for the video image on the Video surveillance monitor. The key value should be increased with increasing load on the system and lowering fps. |
| x32: (x32)\Video\FileSystem x64: (x64)\Video\FileSystem | FileSystem.MinMaxHoursFromNow | 0, 1 | 1 | 4.10.5 | The key enables the feature of counting down the storage period for the Keep no less than parameter from the last archive record timestamp (see also Configuring video camera archive depth). 0 – the archive storage time is counted from the last archive record timestamp. 1 – the archive storage time is counted from the current time. |
Audio | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\Audio | Gain_control | 0, 1, 2 | - | up to 4.7.6 | Sets the volume control parameter: 0 - no volume control; 2 - extra accuracy (CPU overload is possible if there are a lot of channels). |
x32: (X32)\Audio | Max_file_len_sec | > = 0 | 600 | 4.7.4 and later | Defines max. length of audio file (sec) when recording via audio player. |
x32: (X32)\Audio\ | mix | 0, 1 | 0 | 4.7.4 and later | Sets input mixing. |
| x32: (x32)\Audio x64: (x64)\Audio | AudioStreamLoggerEnable | 0, 1 | 0 | 4.9.8 and later | 0 – logging is disabled. 1 or other value different from 0 – streams logging is enabled. The module restart is not required to change the key value. |
| х32:(X32)\Audio x64:(x64)\Audio | AudioMaxDiffTime | >0 | 2000 | 4.10.5 and later | The key sets the maximum discrepancy in milliseconds between the estimated timestamps and the incoming timestamps of the audio packets received from the IP audio input devices. If the difference exceeds this value, then the estimated time will be adjusted. The key only affects the recording to the archive and does not affect the playback of live and archive sound. |
| х32:(X32)\Audio x64:(x64)\Audio | SpeakerLiveDelay | >0 | 2000 | 4.10.5 and later | The key sets the maximum buffer size in milliseconds when playing the live sound using the Speaker objects. On the one hand, it affects the maximum delay when playing the live sound through the Speaker (the maximum delay is equal to the specified value). On the other hand, if the sound is received unevenly, and the size of the incoming packets is greater than the specified value, then there can be interruptions and "wheezing" sounds in the live sound. The key does not affect the playback of archive sound. |
Core | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (x32) | ChangePort | > = 0 | Depends on the port specified for the Client. | 4.7.3 and later | Allows changing the port number. For instance, if it is necessary to change port 20900 to 40900, then 20900="40900" string parameter is created. |
x32: (x32) | CheckPingPeriod | > 0 | 10 | 4.7.4 to 4.10.2 | Sets Server-computer ping period. Note. In Intellect since version 4.10.3 this parameter is set on the settings panel of the Security zone object. |
x32: (x32) | CheckVersion | 0, 1 | 0 | 4.7.4 and later | Sets the parameters of Server connection: the version is checked in connected version parameters. If versions do not agree, then there is a corresponding message and no connection. |
x32: (x32) | Core IP Address | IP address | - | 4.7.3 and later | Address of the computer to the core of which the slave.exe is to connect. |
x32: (x32) | DBAttempts | 1..∞ | 10 | 4.7.3 and later | Number of attempts to connect to database. |
x32: (x32)\Debug | DebugLevel | 0,1,2,3,4 | 0 | 4.7.3 and later | Sets the debug mode: 1 – information is shown in the process window; 2 – information is shown in the process window and logged; 3 – extended log is written – it contains module events; 4 – extended log is written – it contains module events and parameters. |
x32: (x32)\Debug | DebugExtension | Any string | LOG | 4.7.3 and later | Sets extensions of log files. |
x32: (x32)\Debug | DebugFlushPeriod | > = 0 | 500 | 4.7.4 and later | Sets the update rate for log files (ms). |
x32: (x32)\Debug | DebugOptions | Range in decimal system: 0-255. | 0x001 (i.e. 1) | 4.7.3 and later | Hexadecimal logging in the debug mode. This parameter has a complex structure (bit mask) and it is modified using the Tweaki.exe utility. |
x32: (x32)\Debug | DebugQueueMaxLines | 0 - 2147483647 | 2000 | 4.7.4 and later | Specifies max. number of messages in a queue to log file. If there are more than 500 log lines in the queue, then they are to be scaled. |
x32: (x32)\Debug | DebugSize | >=100 | 100 | 4.7.3 and later | Specifies the number of megabytes provided for log. Restricted by disk capacity. |
x32: (x32)\Debug | DebugTime | 0-2147483647 | 48 | 4.7.3 and later | Specifies the number of hours for keeping log files. |
| x32: (x32)\Debug x64: (x64)\Debug | DebugZipDays | >0 | 2 | 4.7.5 and later | Specifies the number of days for keeping log files in the gz format. |
x32: (x32) | defaultconnection | 0, 1 | 1 | 4.7.4 and later | Allows setting connections in the architecture only with the computer where the Computer object is created. |
x32: (x32) | DisableProtocol | 0, 1 | 0 | 4.7.3 and later | Allows disabling protocol. |
x32: (x32) | DisableThreadStatQueue | 0, 1 | 0 | 4.8.0 and later |
By default the key is not created.
Defines whether the queue statistics is called or not. If the registry key value=1, then the box can not be called.
To call the Queue statistics box, follow the steps:
|
x32: (x32) | InstallFolder | Intellect | 4.7.3 and later | Specifies the installation folder. | |
x32: (x32) | Ip_port | 0, 1 | up to 4.7.6 | Specifies the port using which the IP camera will operate on the Computer object. | |
x32: (x32) | Language | 0x0419 | - | 4.7.3 and later | Specifies the language to use (0x0419 - English). |
x32: (x32) | LogIncommingMsg | 0, 1 | not created | up to 4.8.0 | Defines whether logging of incoming events is enabled or not. |
x32: (x32) | LogOutgoingMsg | 0, 1 | not created | up to 4.8.0 | Defines whether logging of outgoing events is enabled or not. |
x32: (x32) | LogStatistics | 0, 1 | not created | up to 4.8.0 | Defines whether the statistics is logged or not. |
x32: (x32) | OnlyLocalProtocol | 0, 1 | 0 | 4.7.3 and later | Only local events are logged. |
x32: (x32) | PeakWorkingSetSizeQuota | >=0 | 0 | 4.8.1 and later | Sets RAM limit (MB). When this limit is exceeded, the module that exceeded this limit will be restarted in the restart service. |
x32: (x32) | PhotoCores | Name or IP address | - | 4.7.3 and later | The list of computers (cores) for mailing user photos. |
x32: (x32) | PriorityClass | 256, 128, 32768, 32, 16384, 64 | 16384 | 4.7.3 and later | Defines the stream priority: 256 - realtime 128 - high 32768 - Above Normal 32 - normal 16384 - below Normal 64 - low |
x32: (x32) | ShowCrashMessage | 0, 1 | 0 | 4.7.5 and later | Create or not the module crash message. |
x32: (x32) | SyncTime | 0, 1 | 0 | 4.7.3 and later | Defines whether to synchronize time between computers or not. |
x32: (x32) | Topmost | 0, 1 | 1 | 4.7.4 and later | Sets the splash screen location: This key is applied for splash screen on the Server/Remote Administrator’s workplace for Intellect versions older than 4.10.0, for versions newer 4.10.1 - both on the Server/Remote Administrator’s workplace and on the Client. |
x32: (x32) | Type_view_dept_log | 0,1,2 | 0 | 4.7.4 and later | Specifies displaying the name of department in the log: 0 - do not add: Ivanov Ivan Ivanovich; |
x32: (x32) | URAttempts | 0 - 10000 | 3 | 4.7.3 and later | Sets the number of attempts to enter the user password . |
x32: (x32) | URDelay | 0 - 10000 | 60 | 4.7.3 and later | Sets the delay period (sec) for re-entering the system. |
x32: (x32) | virtualgrabber | 0, 1 | 0 | 4.7.6 and later | Defines whether it is possible to create a virtual video capture card or no. |
x32: (x32) | SyncNotEmpty | 0, 1 | 0 | 4.8.5 and later | Defines the database synchronization algorithm: 1 – fast synchronization algorithm is in use; 0 - standard synchronization algorithm is in use. |
x32: (x32)\Debug | counter_period | >=0 | 0 | 4.9.0 and later | Defines the time period in seconds, in which information about availability of processor, memory and disk is recorded to the log-file. If the value of parameter is 0, this information is not included to the log-file. |
x32: (x32)\ IntellectRunService | RestartIntellectOnLogonDisable | 0, 1 | 0 | 4.9.0 and later | 1 – Intellect installed as a Service is not restarted under the current user even for users belonging to the IntellectUsers group. 0 – Intellect installed as a Service is restarted under the current user only if the user belongs to the IntellectUsers group. |
x32: (x32)\ IntellectRunService | CheckUserForRestartIntellectDisable | 0, 1 | - | 4.9.0 and later | 0 – Intellect installed as a Service is restarted (when entering the system) under the current user only if the user belongs to the IntellectUsers group. 1 – Intellect installed as a Service is restarted (when entering the system) under the current user even if the user doesn’t belong to the IntellectUsers group. The settings of permissions are to be taken into account when using this key. If the permissions are set incorrectly, then some Intellect features can operate incorrectly. |
x32: (x32) | ShowHiddenObjects | 0, 1 | 0 | 4.9.0 and later | 0 – hidden objects corresponding to IntegratedAudioSource and IntegratedVideoSource objects, as well as to Integrated device child objects are not shown in the object tree in Intellect. 1 – hidden objects are shown in the object tree in Intellect. Intellect is to be restarted when the key value is changed. |
x32: (x32) | InheritServiceEnviroment | 0, 1 | - | 4.8.8 only | The key is essential for proper operation of Intellect in MS failover cluster. |
x32: (x32)\ IntellectRunService\ | InheritServiceEnvironment | 0, 1 | - | 4.9.0 and later | The key is essential for proper operation of Intellect in MS failover cluster. |
x32: (x32) | SortCamsById | 0, 1 | - | 4.8.8 and later | The key is responsible for sorting the list of cameras on the settings panel of the Monitor object. 1 – cameras are sorted by ID; 0 – cameras are sorted by names. |
x32: (x32) | EventProcessingThreads | >=0 | 0 | 4.9.0 | Key reserves the specified number of streams for events processing. |
| 0-8 | Equal to CPU cores number | 4.10.4 | |||
x32: (x32)\Debug | DumpYUV | 0, 1 | - | 4.9.0.959 | Key activates the mode of video dump corresponding to compressor. It is required for diagnostics of StreamLabs (motionWavelet7.1) compressor/decompressor problems. File (or files) with decompressed data will be created by key in the Modules directory. Names of files correspond to the template: W – width; For example, file with resolution 640x480 in YUV420 color area will have the 640x480_22_chunk_0.yuv name. |
x32: (x32) | settings_height | >0, depends on screen resolution | 438 | Sets the height of the object settings panel (in pixels). | |
x32: (x32) | settings_width | >0, depends on screen resolution | 600 | Sets the width of the object settings panel (in pixels). | |
| x32: (x32) x64: (x64) | ATMSendSetup | 0, 1 | 1 | 4.9.3 | 0 – receiving of the SETUP reaction from the ATM object is disabled on the computer where this key is specified. 1 - receiving of the SETUP reaction from the ATM object is enabled on the computer where this key is specified. |
| x32: (x32) x64: (x64) | RegisterF10andF11 | 0, 1 | 1 | 4.9.2 | 1 - F10 and F11 hot keys are in use to control screen displaying (see Main control panel section). 0 - F10 and F11 hot keys are not in use to control screen displaying. Note.When the key is changed Intellect restart is required. To disable F10 and F11 hot keys on the Administrator Remote Workplace, the key is to be created in the \HKEY_CURRENT_USER\Software\ITV\Intellect registry section. To disable F10 and F11 hot keys on the Administrator Remote Workplace when operating under the Admin account, he key is to be created in the same registry section as on Server (x32)/(x64). |
| x32: (x32) x64: (x64) | DisableF8 | 0, 1 | 0 | 4.10.4 | 0 - F8 hot key is in use to call the Execute menu on the main control panel. 1 - F8 hot key is not in use. Note. To disable F8 hot key on the Administrator Remote Workplace, the key is to be created in the \HKEY_CURRENT_USER\Software\ITV\Intellect registry section. To disable F8 hot key on the Administrator Remote Workplace when operating under the Admin account, he key is to be created in the same registry section as on Server (x32)/(x64). |
x32: (x32) | check_digital | 0, 1 | 0 | 4.8.0 | When the key value = 1, video or archive period is exported from the Monitor interface using the admin password. |
| x32: (x32) x64: (x64) | CONNECT_ATTEMPTS | >=1 | 1 | 4.9.4 | The key sets the number of attempts to connect the Client to Server. The key is specified on the side of the Client. |
| x32: (x32) x64: (x64) | FLUSH_TIMER_TIMEOUT | >0 | By default the key is not created, the value is 10. | 4.9.4 | The key specifies maximum waiting time (in milliseconds) before sending data over the network. The higher the value of this parameter, the more productive the system is (due to decreasing resources when sending a large amount of small messages). However, time of response to events can also increase. |
| x32: (x32) x64: (x64) | UnloadDelay | 0 to 60000 ms | 5000 | 4.9.5 | The key sets the delay between disabling Guardant and unloading Intellect. The delay is essential for the FORCED_OFF event generation of the SLAVE object and in case this event is used in scripts or programs, these scripts and programs are executed. If UnloadDelay = 0, unloading is performed without any delays, i.e. script/program in which the specified event is used, cannot execute. |
| x32: (x32) x64: (x64) | SortSubItems | 0, 1 | 1 | - | The key is for specifying the way of sorting the objects in the tree: 0 – sorting by name. 1 – sorting by ID. Note 1. If sorting by name is chosen, and there are numbers in the object name, then the objects will be sorted in alphabetical order. For example, an object with the name "115" will be above the object with the name "15", because in the name "115" the second number is 1, and in the name "15" the second number is 5. Note 2. This key also affects the sorting of objects in the tree when adding the objects to a layer in the Map Editor utility. |
| x32: (x32) x64: (x64) | ShowSmallBarAlways | 0, 1 | 0 | 4.10.1 | The key enables displaying the main control panel of Intellect on the screen. 0 – the main control panel is displayed when pointing to the upper right corner of the screen. 1 – the main control panel is always displayed in the upper right corner of the screen. |
| x32: (x32) x64: (x64) | UpdateProtocolPeriod | > 0 | - | 4.10.2 | Sets time period (in days) of storing the change protocol in the database. The storing period is counted from the last recording or starting from the current time depending on the value of the ClearProtocolFromCurrentTime key (see above). Recordings storing period of which has expired are deleted at midnight every 24 hours in case the license is activated. |
| x32: (x32) x64: (x64) | permissible_memory_limit | >0 | - | 4.10.3 | The key sets the occupied memory threshold, reaching which the core starts receiving messages with a delay. The key should be used when due to excessive memory consumption, the module shuts down. |
| x32: (x32) x64: (x64) | MsgCompressOn | 0, 1 | 0 | 4.10.3 | The key enables the compression of transmitted messages: 0 - compression is disabled. 1 – messages from the cores are sent compressed (zip with maximum compression). Compression allows reducing the network load. |
| x32: (x32) x64: (x64) | user_card_info_on | 0, 1 | 0 | Intermediate versions 4.10.3 | The key is used with the ACS/FAS integration modules that are the part of ACFA Intellect. It enables displaying the access card number for all events associated with the cards in the Event Viewer. Note. In the released version 4.10.3 to show and hide the Card column use the Hide Card checkbox – see Event viewer parameters. |
| x32: (x32) x64: (x64) | CriticalErrGui | 0, 1 | 0 | 4.10.3 | It enables displaying messages about database connection errors regardless the debugging mode (see the description of the Debug key and Selecting and enabling the debug mode of Intellect software section). 0 - messages about database connection errors are displayed only at Debug 4 debugging levels. 1 - messages about database connection errors are displayed regardless the selected debugging level. |
| x32: (x32) x64: (x64) | IntellectCloseTimeout | >0 | 60000 | 4.8.3 | It sets Intellect close timeout in milliseconds. If intellect.exe process does not close during this timeout, then it is terminated forcefully. If there is no key, then timeout is 60 seconds. |
| x32: (x32) x64: (x64) | SaveIncommingMsg | 0, 1 | 0 | 4.7.8 | It enables recording of incoming messages to log files for started modules. The file name looks like <module name>.exe.cd.log. These files are stored in the same folder as the executed module file, for instance, for intellect.exe the intellect.exe.cd.log file is stored in the Intellect installation directory and for itvscript.exe the itvscript.exe.cd.log file is stored in the Modules folder. When the size of the log file exceeds 4 GB, it is archived to the backup file with .bak extension - <module name>.exe.cd.log.bak. This is necessary to avoid module overload. Note. The log file is rewritten when Intellect is restarted. 0 – recording of incoming messages is disabled. 1 – recording of incoming messages is enabled. |
| x32: (x32) x64: (x64) | BackupFolder | Address of a local or network folder | - | 4.7.6 | Specifies the address of the folder to save a backup copy of the database created by a macro or using the idb.exe utility. For example, C:\Documents and Settings\AVP\Desktop\Backup If the database copy is to be stored on the network disk, then the UNC path to the network folder (with the recording access) is to be specified on the disk in the \\ServerName\ShareName format. Take into account the fact that all network resources that require additional authentication are to be enabled using the same username as for running the SQL Server service. See also Creating the database backup copy |
х32 and x64: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon | Shell | Any text value | explorer.exe | 4.10.5 | If the key value contains the "explorer" string (for example, the default value, "testexplorertest" or "123explorertest125" values), the Save button is displayed in the About program... window. Otherwise, the Save button is hidden. |
| x32: (x32)\ IntellectRunService x64: (x64)\ IntellectRunService | IntellectUserGroup | Any text value | from 4.10.0 | If Intellect is installed as a Service, and you need to use a user group other than IntellectUsers, then specify the required user group name in this key. | |
| x32: (x32) x64: (x64) | monitor_refresh_delay | 10 - 3000 | 3000 | from 4.10.5 | The key sets a period in milliseconds to update video on Video Surveillance Monitors of the Clients after Failover Service has transferred configuration. If the key value is less than 500, the monitors are updated regardless of the number of cameras. If the key value is more than 500 and the number of cameras on the monitor is more than 64, the update does not occur while the System Settings dialog box is open. |
| x32: (x32) x64: (x64) | DisableUpdateProtocol | 0, 1 | 0 | from 4.7.5 | The key disables the filling of the UPDATE_PROTOCOL table storing information about changes of Intellect object settings (except the User objects). 0 – the UPDATE_PROTOCOL table is filled. 1 – the UPDATE_PROTOCOL table is not filled. |
| x32: (x32) x64: (x64) | max_disp_menu_items | >0 | 50 | from 4.10.5 | If the number of screens assigned to a computer is larger than that specified in the key, scrolling the list of screens with the mouse wheel becomes available (if the size of the list is larger than the size of a computer monitor). The key is set on each Server and Client where this function is required. |
| x32: (x32) x64: (x64) | URM_ProcessWait | >0 | 10000 | from 4.10.5 | The key sets time period in milliseconds to wait for the Client to stop before aborting the Video.run process. The key should be created on Clients. |
| x32: (x32) x64: (x64) | show_responsible | 0, 1 | 0 | from 4.10.5 | The key enables the display of users responsible for the region (if assigned) in events from objects related to the regions:
The key is created on the Server. |
| x32: (x32) x64: (x64) | NotifyExpireLic | 0, 1 | 0 | from 4.10.5 | The key enables the event showing the days left to the license expiration (see SLAVE). |
| x32: (x32) x64: (x64) | sync_timeout | >0 | 600 | from 4.10.5 | The key sets the time period in seconds allocated for synchronizing the database when starting Intellect software. The key must be created on the Server, where synchronization with another server occurs. See also Database synchronization setup |
| x32: (x32)\Display x64: (x64)\Display | DISPLAY_MAX_NUM | 1-1000 | 500 | from 4.10.5 | The key sets the maximum number of Display objects that can be assigned to one computer. |
| х32: (x32)\ x64: (x64)\ | RestPort | 0 - 65535 | 101120 | from 4.10.1 to 4.10.2 | Sets the port through which Intellect receives events and reactions via HTTP request. See also Sending reactions and events to Intellect using HTTP request. |
| 0 | from 4.10.3 | ||||
Telemetry | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\ | Delay | > = 0 | 250 | 4.7.3 and later | Defines the delay (ms) when sending commands to the camera. This key is essential for scaling the stream of commands to the device as some devices can be blocked because of too many commands and cannot process the information.
This parameter is not supported by IP cameras. |
x32: (X32)\ | JoysticThreshold | > = 0 | 5 | 4.7.6 HOTFIX and later | This parameter sets the joystick trigger threshold: the less the number is, the more sensitive joystick is. 0 value is not recommended to be used, as commands can be sent randomly. When the value is too big, the joystick becomes rotation-insensitive. |
x32: (X32)\ | max_speed | 0-10 | - | 4.7.3 to 4.9.7 | Sets max. camera speed. |
x32: (X32)\ | min_speed | 0-10 | - | 4.7.3 to 4.9.7 | Sets min. camera speed. |
x32: (X32)\ | PriorityDelay | > = 0 | 30000 | 4.7.3 and later | Defines the priority delay (ms). |
x32: (X32)\ | UseBoschOSRD40 | 0, 1 | - | 4.8.4 and later | Enables presets saving for Bosch-Autodome control protocol. |
x32: (X32)\ | PnPJoystick | 0, 1 | 0 | 4.8.3 and later | The key defines whether to restart Intellect after connecting a joystick: 0 - Intellect is to be restarted after connecting the joystick. |
x32: (X32)\ | Zenable | 0, 1 | 1 | 4.7.7 and later | The key is in use with joysticks (e.g., Logitech Attack 3) where the telemetry control operates incorrectly because of shifted Z axis. Z axis is disabled when the parameter value is 0. Z axis is enabled when the parameter value is 1. |
| x32: (X32)\ TELEMETRY x64: (x64)\TELEMETRY | ZoomSpeed850 | 0,1 | 1 | 4.9.0 and later | The key is used in order to set the zoom step when panasonic-850 telemetry protocol is in use: 1 – zooming with 50% step of max. possible 0 – zooming with 20% step of max. possible |
| x32: (X32)\ TELEMETRY x64: (x64)\TELEMETRY | Zdirection | 0, 1 | 0 | 4.7.6 | The key is responsible for coordinate move in the Z-direction. |
| x32: (X32)\ TELEMETRY x64: (x64)\TELEMETRY | Ydirection | 0, 1 | 0 | 4.7.6 | The key is responsible for coordinate move in the Y-direction. |
| x32: (X32)\ TELEMETRY x64: (x64)\TELEMETRY | Xdirection | 0, 1 | 0 | 4.7.6 | The key is responsible for coordinate move in the X-direction. |
| x32: (X32)\ TELEMETRY x64: (x64)\TELEMETRY | WaitDelay | >=0 | 0 | 4.7.5 | If a joystick sends the messages about its state to Intellect too frequently and Intellect has no time to process these messages, then this parameter is in use – it allows calling the signal handler less frequently. For instance, this parameter should be used with Axis 295 joystick. The best parameter value is to be chosen. The value should match the 100 – 300 range. |
| x32: (x32)\ TELEMETRY x64: (x64)\TELEMETRY | TelemetryDirectCommand | 0, 1 | 1 | 4.9.8 | The key specifies way of command transmission to telemetry: 1 – telemetry server is connected to video servers and sends commands to devices. 0 – telemetry server sends commands to the Intellect core which send them to devices. See also description of the MonitorToTelemetryDirectCommand key below. |
| x32: (x32)\ TELEMETRY x64: (x64)\TELEMETRY | MonitorToTelemetryDirectCommand | 0, 1 | 0 | 4.9.8 | The key specifies way of transmission telemetry commands while control from the Monitor: 1 – telemetry server is connected to video servers and sends commands to devices while telemetry control from the Monitor. 0 – telemetry server sends commands to the Intellect core which send them to devices while telemetry control from the Monitor. The key is in use with the TelemetryDirectCommand key to provide smoother telemetry control. Recommended values of these keys: TelemetryDirectCommand = 1 (default value) MonitorToTelemetryDirectCommand = 1 (attention: default value is 0) Attention! Client, server and camera should be in one subnet without video gate when using these registry keys. Otherwise, system will not operate. |
| x32: (x32)\ TELEMETRY x64: (x64)\TELEMETRY | SendEventToCore | 0, 1 | 0 | 4.10.0 | The key is to enable the function of sending events to Intellect core when controlling PTZ. This function is essential for PTZ control audit. 1 – when sending any reaction of TELEMETRY object the corresponding event is generated. 0 – during PTZ control events are not generated. |
| x32: (X32)\ Video\CommonPresets x64: (x64)\Video\CommonPresets | ONVIF | 0, 1 | 0 | 4.10.0 | The key enables presets created on the camera in Intellect. The function is only available when camera is connected via ONVIF protocol and only if video server settings are selected when adding a Video capture device using the Camera discovery tool and the Use device settings checkbox is set unchecked on the settings panel of the Video Capture Device object. 0 – presets created on the camera are not used in Intellect. 1 – presets created on the camera are in use in Intellect. The features are listed below:
|
| x32: (x32)\ TELEMETRY x64: (x64)\TELEMETRY | panas850_stop_dublicates | >0 | - | 4.10.2 | The key is in use if the camera rotation is not stopped when telemetry is controlled over Panasonic-850 protocol. The key specifies how many times the stop command is to be duplicated. |
Player | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\Player | Wav_delay | > = 0 | 0 | 4.7.3 and later | Defines the sound delay (sec) when playing back synchronously video with the sound. |
Event log | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\ EventViewer | Overlay | 0, 1 | 1 | 4.7.3 and later | Defines whether to use overlay. |
x32: (X32)\ EventViewer | Topmost | 0, 1 | 0 | 4.7.3 and later | Defines whether to display event log as topmost window: 0 - standard window; 1 - topmost window. |
x32: (X32)\ EventViewer | UserActivityTimeout | >0 | 3 | 4.10.3 | It sets the time period in minutes, after which, if there is no user activity, automatic scroll to the end of the event list when new events arrive is enabled in the Event Viewer window. If 0 is specified, then automatic scroll is disabled. |
Disabling system objects | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\ Subscribe | OBJECT_NAME | (*) (№.*) (№.№) | 4.7.3 and later | Describes rules for system starting. Unimplemented system objects are disabled. You should create a string parameter with the name that is used by the system of the object that is to be disabled and specify its ID separated by a full stop. | |
Import module | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\ DB Import | ChunkSize | > 0 and >= photo size | 32768 | 4.7.3 and later | Sets the buffer size (in bytes) when reading large files (photo) in the external DB. |
x32: (X32)\ DB Import | CursorLocation | 1, 2, 3 | 2 | 4.7.3 and later | Sets the cursor location (pointer to DB entries): |
x32: (X32)\ DB Import | DwSleep | > = 0 | 1 | 4.7.3 and later | Sets the delay value (ms) when sending modified entries to the core in the external DB in order not to get 100% CPU load. |
x32: (X32)\ DB Import | FlagsLog | - | - | up to 4.7.5 | |
x32: (X32)\ DB Import | MoveFirst | 0 | 0 | 4.7.3 and later | The key must not be modified. |
x32: (X32)\ events | Events_out | - | - | up to 4.7.5 | Debug key |
x32: (X32)\ events | Events_out2 | - | - | up to 4.7.5 | Debug key |
x32: (X32)\ events | In | - | - | up to 4.7.5 | Debug key |
x32: (X32)\ events | PostedEvents | - | - | up to 4.7.5 | Debug key |
x32: (X32)\ events | PostedReacts | - | - | up to 4.7.5 | Debug key |
x32: (X32)\ events | Reacts_out | - | - | up to 4.7.5 | Debug key |
Special keyboard | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\ Keyb | Prefix | VK_NUMPAD0 | 0x60 0x61 0x62 0x63 0x64 0x65 0x66 0x67 0x68 0x69 0x6A 0x6B 0x6C 0x6D 0x6E 0x6F 0x70 0x71 0x72 0x73 0x74 0x75 0x76 0x77 0x78 0x79 0x7A 0x7B 0x7C 0x7D 0x7E 0x7F 0x80 0x81 0x82 0x83 0x84 0x85 0x86 0x87 | 4.7.3 and later | The list is not full. Any soft key can be in use. |
| x32:(X32)\ Keyb x64:(x64)\Keyb | ProcessAll | 0 ,1 | 0 | The key allows using the standard keyboard as the special one. In this case keypress on the standard keyboard will be considered as keypress on the special keyboard and processed according to the ini file. You can find out key codes corresponding to one or another keyboard key using the The Debug window: when the key is pressed they are sent in the wparam<> parameter of NEW_KEY_PRESSED event from the KEYB object. E.g., 65-90 codes correspond to a-z letter symbols and 48-57 codes correspond to 0-9 figures. | |
Video analytics | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\Video\VMDA x64: (x64)\Video\VMDA | VMDA.inactiveInterval | >0 | - | 4.9.0 | Key specifies time period in minutes, during which absence of detected objects by tracker is permitted. If the key is created, after the specified time and if there is no activity of VMDA detection, the message about inactivity will be generated. On default, this message is not generated. |
| x32: (x32)\Video\VMDA x64: (x64)\Video\VMDA | VMDAEXT | 0, 1 | 0 | 4.9.8 | On default the key is not created that corresponds to value 0. The key is for separating VMDA tracker processes to the single process. It's recommended to do to increase stability and reliability of the Intellect basic functional. Used CPU resources and memory are increasing while separating trackers to the single process. 0 – process of VMDA trackers is starting in the video.run process. 1 – process of VMDA trackers is starting in the single detector_ext.run process. Note. It's required to install the Intellect Detector Pack ( version>=2.1.0) for correct key operation. |
| x32: (x32)\Video\VMDA x64: (x64)\Video\VMDA | VMDAEXT.RAM | >0 | 300 | 4.9.8 | The key is in use with the VMDAEXT key and sets the memory space in megabytes which can use the detectror_ext.run process. The process will be restarted if allocated memory is exceeded. |
x32:(X32)\Video\VMDA x64: (x64)\Video\VMDA | VMDA.useSpeedLimitTypeLessThan | VMDA detector IDs separated by comma or semicolon | - | 4.10.4 and later | The VMDA detection tool IDs separated by comma or semicolon that should be triggered when the object speed is less than the speed configured for the VMDA detection tool. Note 1. If no ID is specified for this parameter, or there is no parameter at all, the detection tool is triggered when an object crosses the line in the selected direction with a speed that is approximately the same as the speed configured for the VMDA detection tool. Note 2. The same VMDA detector id can only be specified for either the VMDA.useSpeedLimitTypeLessThan or the VMDA.useSpeedLimitTypeMoreThan (see below) parameters. The simultaneous operation of both these parameters for the same VMDA detector is not allowed. |
x32:(X32)\Video\VMDA x64: (x64)\Video\VMDA | VMDA.useSpeedLimitTypeMoreThan | VMDA detector IDs separated by comma or semicolon | - | 4.10.4 and later | The VMDA detection tool IDs separated by comma or semicolon that should be triggered when the object speed is greater than the speed configured for the VMDA detection tool. Note 1. If no ID is specified for this parameter, or there is no parameter at all, the detection tool is triggered when an object crosses the line in the selected direction with a speed that is approximately the same as the speed configured for the VMDA detection tool. Note 2. The same VMDA detector id can only be specified for either the VMDA.useSpeedLimitTypeLessThan (see above) or the VMDA.useSpeedLimitTypeMoreThan parameters. The simultaneous operation of both these parameters for the same VMDA detector is not allowed. |
| х32: (X32)\Video\VMDA x64: (x64)\Video\VMDA | VMDA.ignoreAnaliticStream | 0, 1 | 0 | 4.9.8 and later | The key sets the camera stream used by the detection modules included in the Detector Pack subsystem. 0 - the Video Analytics stream is used. 1 - the Default stream is used. Note. If the camera is not used in the multi-thread mode, the first stream (the only one) will be used regardless of the key value. |
Web Server | |||||
|---|---|---|---|---|---|
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (x32)\WebServer\ x64: (x64)\WebServer\ | RequestTimeout | >0 | 10000 | 4.9.0 | Sets max.time (in milliseconds) for Server to process a request. |
x32: (x32)\WebServer\ x64: (x64)\WebServer\ | ConnectionTimeoutAtIdle | >0 | 30000 | 4.9.0 | Sets max.time (in milliseconds) for connection inactivity between Client and Server. Inactive connection is disconnected upon timeout. |
x32: (x32)\WebServer\ x64: (x64)\WebServer\ | TelemetryPriority | 0 - 3 | 1 | 4.10.5 | Sets the PTZ control priority for a web browser. 0 – control is prohibited 1 – low priority control 2 – medium priority control 3 – high priority control |
Map | |||||
|---|---|---|---|---|---|
| Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (x32)\Map\ x64: (x64)\Map\ | NotUsingCash | 0, 1 | - | 4.9.2 | The key is in use on the map when there are objects the backgrounds of which are overlaied. In these cases the object icons can be erroneously displayed because of background caching. To fix these bugs you should disable caching by specifying 1 value for the key. Take into account the fact that caching disabling can cause high CPU load. |
x32: (x32)\Map\ x64: (x64)\Map\ | AlternativeSelect | 0, 1 | 0 | 4.10.0 | The key is designed to disable object framing. 0 – the object is framed. 1 – the object is not framed. |
x32: (x32)\Map\ x64: (x64)\Map\ | <Map_id>MiniMapB | >0 | MiniMapT + 169 | 4.10.1 | Sets the Y-axis coordinate of the bottom right corner of the minimap on the monitor in pixels. Changing of the key value can be required for exact minimap sizing or for resetting minimap position (by deleting MiniMap keys). |
x32: (x32)\Map\ x64: (x64)\Map\ | <Map_id>MiniMapL | >0 | The X-axis coordinate of the upper left corner of the Map | 4.10.1 | Sets the Y-axis coordinate of the upper left corner of the minimap on the monitor in pixels. Changing of the key value can be required for exact minimap sizing or for resetting minimap position (by deleting MiniMap keys). |
x32: (x32)\Map\ x64: (x64)\Map\ | <Map_id>MiniMapR | >0 | MiniMapL + 287 | 4.10.1 | Sets the X-axis coordinate of the bottom right corner of the minimap on the monitor in pixels. Changing of the key value can be required for exact minimap sizing or for resetting minimap position (by deleting MiniMap keys). |
x32: (x32)\Map\ x64: (x64)\Map\ | <Map_id>MiniMapT | >0 | The Y-axis coordinate of the upper left corner of the Map | 4.10.1 | Sets the X-axis coordinate of the upper left corner of the minimap on the monitor in pixels. Changing of the key value can be required for exact minimap sizing or for resetting minimap position (by deleting MiniMap keys). |
x32: (x32)\Map\Minimap x64: (x64)\Map\Minimap | ShowOnMouseMove | 0, 1 | 0 | 4.10.2 | Sets how the minimap is displayed: 0 – using the Minimap item in the Map feature menu. 1 – pointing the mouse cursor to the top left corner of the Map. |
x32: (x32)\Map\ x64: (x64)\Map\ | EventFontHeight | Integer | -8 | 4.10.3 | Specifies the font size for displaying information about the latest event in the feature menu of the object on the map. |
x32: (x32)\Map\ x64: (x64)\Map\ | InscribeEditor | 0, 1 | 1 | 4.10.5 and later | The key enables the automatic "Fit the window" checkbox activation for all layers in the Map editor window if this checkbox was previously set for any layer. 0 - the layer will be fit into the Map editor window only if the "Fit the window" checkbox was previously set for this layer. 1 - any layer will be fit into the Map editor window, if the "Fit the window" checkbox was previously set for any layer. |
x32: (x32)\Map\ x64: (x64)\Map\ | HideAnalogName | 0, 1 | 0 | 4.10.5 and later | The key hides the "Value =" in the value of the objects on the Map for which the Text type of display is selected. 0 - objects' text values are displayed on the Map with the "Value =. 1 - objects' text values are displayed on the Map without the "Value =. |
x32: (x32)\Map\ x64: (x64)\Map\ | TouchScreen | 0, 1 | 0 | 4.10.5 and later | The key enables opening of the functional menu of the object on the Map by left double clicking the icon. 0 - left double-clicking the icon of an object on the Map does not open the functional menu. 1 - left double-clicking the icon of an object on the Map opens a functional menu. |
x32: (x32)\Map\ x64: (x64)\Map\ | MapBlinkUpdateTimeoutMS | >0 | 350 | 4.10.5 and later | Specifies the period in milliseconds to update the Map. The Map update period determines the flashing period of the icons. At the default value (350 ms), the flashing period of the icons is 700 ms. Reduce the key value, for example, in cases where the object state changes faster than once every 700 ms and icons are not updated when blinking. Increase the key value to reduce the load on the Map module. |
Mail Message Service | |||||
|---|---|---|---|---|---|
| Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
| x32: (x32)\MMS\ x64: (x64)\MMS\ | UseTls | 0, 1 | 1 | Defines whether to use TLS encoding for Mail Message Service or not. | |
Short Message Service | |||||
|---|---|---|---|---|---|
| Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
| x32: (x32)\SMS\ x64: (x64)\SMS\ | ProcessFromSim | 0, 1 | By default the key is not created, the value is 0. | 4.9.4 | The key is to be created with value 1 if a USB modem is connected to Intellect and it operates in Intellect, but Intellect does not get the RECEIVE event from SMS object when sending messages to such modem. HUAWEI E173 is an example of such modem. Important! SMS messages are to be stored on SIM for proper operation of the registry key. Important! When the key is in use, SMS messages sent to the modem are deleted. |
Script | |||||
|---|---|---|---|---|---|
| Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (x32)\Script\ x64: (x64)\Script\ | DebugMaxLines | >=0 | 200 | 4.9.5 | Sets the number of lines to be displayed in the Script debug window (for details see Programming Guide (JScript)). |
x32: (x32)\Script\ x64: (x64)\Script\ | TerminateProcessOnHang | 0, 1 | 1 | 4.10.4 | 0 – Intellect core does not terminate the itvscript.exe process when it hangs. 1 – Intellect core terminates the itvscript.exe process when it hangs. |
Abandoned objects detection tool of the Tracker object | |||||
|---|---|---|---|---|---|
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\Video | UseRealTimeStamps | Comma-separated camera identifiers | - | 4.9.5 to 4.9.7 | Identifiers are separated by commas for cameras for which current timestamps are to be sent. Due to features of the unattended object detection tool (that is a third-party module) it sends synthetic timestamps by default. |
| x32:(X32)\Video\VMDA x64:(x64)\Video\VMDA | 4.9.8 and later | ||||
x32: (X32)\Video | VMDA.unattendedObjectSensitivity | Comma-separated sensitivity values in the ‘camera id.sensitivity’ format. Sensitivity range –[1...25] EXAMPLE: unattendedObjectSensitivity="1.15,99.20,4.7" | 7 for all cameras | 4.9.5 to 4.9.7 | Sets sensitivity of unattended objects detection tool for specified cameras. |
| x32:(X32)\Video\VMDA x64:(x64)\Video\VMDA | 4.9.8 and later | ||||
x32: (X32)\Video | VMDA.unattendedObjectLongMemory | Comma-separated camera identifiers in the ‘camera id.1’ format. EXAMPLE unattendedObjectLongMemory ="1.1,1000.1,2.1,999.1,3.1,5.1,4.1,6.1,7.1,8.1" 'camera_id.0' means that long memory detection tool is disabled for the camera with the corresponding identifier. | - | 4.9.5 to 4.9.7 | Sets identifiers of cameras to which the unattended object detection tool with long memory is to be used. |
| x32:(X32)\Video\VMDA x64:(x64)\Video\VMDA | 4.9.8 and later | ||||
x32: (X32)\Video | VMDA.unattendedObjectTimeBeforeCheck | Values of periods are comma-separated and are in the ‘camera id.period’ format. EXAMPLE unattendedObjectTimeBeforeCheck = "4.20,1.10,3.40" | By default it is the same as the waiting for loss period set while configuring the Tracker object (see Creating and configuring the Tracker object). | 4.9.5 to 4.9.7 | Time in seconds before checking object in case of using the unattended object detection tool with long memory. |
| x32:(X32)\Video\VMDA x64:(x64)\Video\VMDA | 4.9.8 and later | ||||
x32: (X32)\Video | determineNoise | 0, 1 | 1 | 4.9.5 to 4.9.7 | Use (1) or not (0) the algorithms for detecting pseudo-moving objects |
| x32:(X32)\Video\VMDA x64:(x64)\Video\VMDA | 4.9.8 and later | ||||
x32: (X32)\Video | VMDA.determineColorIdentity | 0, 1 | 1 | 4.9.5 to 4.9.7 | Use (1) or not (0) the algorithms for detecting objects matching by their color characteristics. The key enables more percise colour determination for smart detection and archive search (see Configuring smart video detection tools and Search by colour). |
| x32:(X32)\Video\VMDA x64:(x64)\Video\VMDA | 4.9.8 and later | ||||
x32: (X32)\Video | determineHumanCar | Comma-separated camera identifiers. EXAMPLE determineHumanCar ="1,1000,2,999,3,5,4,6,7,8" | - | 4.9.5 to 4.9.7 | Sets the list of camera identifiers for which the algorithm of determining whether it is a car or a human is to be ENABLED. For proper operation of the tracker determineGivenTaken and determineHumanCar keys MUST be used at the same time. There is no point in using only one key. |
| x32:(X32)\Video\VMDA x64:(x64)\Video\VMDA | 4.9.8 and later | ||||
x32: (X32)\Video | determineGivenTaken | Comma-separated camera identifiers. EXAMPLE determineGivenTaken ="1,1000,2,999,3,5,4,6,7,8" | 4.9.5 to 4.9.7 | Sets the list of camera identifiers for which the algorithm of determining whether the object is given or taken is to be enabled in the unattended object detection tool. For proper operation of the tracker determineGivenTaken and determineHumanCar keys MUST be used at the same time. There is no point in using only one key. | |
| x32:(X32)\Video\VMDA x64:(x64)\Video\VMDA | 4.9.8 and later | ||||
x32: (X32)\Video | VMDAFPS | >=-1 | 30 | 4.9.5 to 4.9.7 | Sets fps to be sent to the tracker. |
| x32:(X32)\Video\VMDA x64:(x64)\Video\VMDA | 4.9.8 and later | ||||
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | useLeftImprover | 0,1 | - | 4.9.8 and later | The key specifies usage of previous frame processing before its sending to video analytics repository: 0 – not to use. 1 – to use. If the key is enabled, it's in use for all cameras. Important! The useFilterFrame parameter is to have ‘1’ value for key operation (see below). |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | longShif | >=0 | - | 4.9.8 and later | Parameter of moving average accumulation is reasonable only when value 1 is assigned to the useLeftImprover parameter. It is not recommended to change value of parameter. |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | longShiftUpdateThreshold | >=0 | - | 4.9.8 and later | Threshold of difference from a background below of which the long moving average is updated. It has a point if value 1 is assigned to the useLeftImprover parameter. It is not recommended to change the parameter value. |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | useLeftImproverGeometry | 0, 1 | - | 4.9.8 and later | The key specifies post processing usage of frames received from video analytics repository. Procedure is configured only for operation with frames from left-off items detection, so it can operate incorrectly with frames from tracker. If the key is enabled, it is in use for all cameras. Important! The useFilterFrame parameter is to have ‘1’ value for key operation (see below). |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | timeShift | >=0 | - | 4.9.8 and later | Time period in seconds after receiving a frame from video analytics repository, during which item in the frame will be analyzed for "invalidity". Operates only when the useLeftImproverGeometry key is enabled. The more this time period the longer item is analyzed and analysis is more authentic, but the more unlikely the item will be removed from the frame by the time of analysis completion. |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | timeLife | >=0 | - | 4.9.8 and later | Time period during which left-off item frame will be sent after its recognition by analyzer of post processing video analytics repository. It is in use only when the useLeftImproverGeometry key is enabled. |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | maxDeltaInside | 0-255 | - | 4.9.8 and later | Value of maximal difference of average color in the left-off item frame at the moment of frame receiving from video analytics repository and at the moment after time specified by the timeShift key. The less value, the more strict condition and the less number of items (left-off items) satisfying this condition. |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | minDeltaOutside | 0-255 | - | 4.9.8 and later | Minimal difference of average color in the left-off item frame received from video analytics repository from average color around the frame, at which the frame will be further analyzed and won't be considered as invalid trigger. It is in use only when the useLeftImproverGeometry key is enabled. The higher value, the more strict condition and the less number of items (left-off items) satisfying this condition. |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | useFilterFrame | 0, 1 | 0 | 4.9.8 and later | The key is responsible for enabling frame pre-process before its analysis. If it is disabled, useLeftImprover and useLeftImproverGeometry keys won’t work (see above). 1 – enabled; 0 – disabled. |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | VMDA.determineNoise | 0, 1 | 1 | Starting with 4.10.3 | Enables the noise determination function on the video and when smart video detection tools operate. |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | VMDA.determineGivenTaken | IDs of cameras, comma-separated | - | Starting with 4.10.3 | Set VMDAEXT to 1 in order to use this key. Enables the function of determining the given/taken objects on the side of the Tracker library. Information about given/taken objects is recorded to the VMDA metadata storage. After that, it is possible to perform forensic search by them in the archive. See also CAM_VMDA_DETECTOR. |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | VMDA.determineHumanCar | IDs of cameras, comma-separated | - | Starting with 4.10.3 | Set VMDAEXT to 1 in order to use this key. Enables the function of determining the object type on the side of the Tracker library. This type is stored to the VMDA metadata storage. After that, it is possible to perform forensic search by it in the archive. See also CAM_VMDA_DETECTOR. |
| x32: (x32)\Video\VMDA x64: (x64)\Video\VMDA | VMDA.filterGivenOrTaken | The VMDA detector identifier and the operation mode separated by the dot "." The pairs of values are separated by a comma "," or a semicolon ";" | - | Starting with 4.10.5 DP 2.6 | Set VMDAEXT to 1 and specify required value for VMDA.determineGivenTaken in order to use this key. Sets the operation mode of VMDA detectors, which detect the abandoned objects. The following modes are available: 0 - trigger on abandoned objects (default) 1 - trigger on disappeared objects 2 - trigger on abandoned and disappeared objects Key value format: VMDA_identifier dot "." operation_mode. For example: 1.0 To list several pairs of detectors and their operating modes, use a comma "," or a semicolon ";". For example: 1.0;2.2;3.1 |
RTSP-server | |||||
|---|---|---|---|---|---|
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
| x32:(x32)\StreamingServer x64:(x64)\StreamingServer | def_port | >0 | 17000 | 4.9.9 | Sets the range start of used UDP protocols for RTSP-RTP. |
| x32:(x32)\StreamingServer x64:(x64)\StreamingServer | IpInterface | IP-address | - | 4.9.9 | Sets IP-address of network interface which is to be used for RTSP-server broadcast. |
| x32:(x32)\StreamingServer x64:(x64)\StreamingServer | split_range | >0 | 1 | 4.10.1 | The key is responsible for merging archive fragments into one when playing back the archive via the RTSP Server. If the split between archive fragments is less than time specified in the key, then archive fragments will be in the same range in the DESCRIBE field when addressing RTSP archive as if there is no split in the archive. Note. The key is in use for integration with ECHD. |
| x32:(x32)\StreamingServer x64:(x64)\StreamingServer | send_real_time | 0, 1 | 0 | 4.10.1-4.10.3 | The key is in use if there are any problems playing back the RTSP archive in the VLC media player. The key allows sending real time instead of frame time to the player. Important! If the key value is “1”, then the Single Data Center (ECHD) clients won’t work. Note. Since Intellect 4.10.4, the VLC player compatibility mode parameter is used instead of this key. It is located on the settings panel of the RTSP Server object - see Configuring RTSP Server Module. |
x32: (x32)\StreamingServer | LogFrames | 0, 1 | 1 | 4.10.1 | The key enables RTSP stream statistics logging. |
AviExport utility | |||||
|---|---|---|---|---|---|
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\Video\AVI | UseCodecAXXN | 0, 1 | 0 | 4.10.0 | 1 – utility is started in export mode in the AXXN codec if Export to AVI in initial format item is selected.
0 – export is possibly performed in original format. Note. See also The AviExport utility. |
| x32: (x32)\Video\AviExport x64: (x64)\Video\AviExport | ExportPriority | -2 to 2 | -1 | 4.10.0 | Key sets priorities of the AviExport utility and is used by the Video.run module while its starting: -2 – low priority (IDLE_PRIORITY_CLASS) -1 – below average priority(BELOW_NORMAL_PRIORITY_CLASS) 0 – average priority (NORMAL_PRIORITY_CLASS) 1 – above average priority (ABOVE_NORMAL_PRIORITY_CLASS) 2 – high priority (HIGH_PRIORITY_CLASS) |
| x32: (x32)\Video\AviExport x64: (x64)\Video\AviExport | BookmarkMaxLen | >0 Fractional values can be specified with comma as decimal separator (for example, "0,5") | - | 4.10.3 | Sets the length of a bookmark in hours. If the key is not created, the bookmark length is not limited. |
| х32:(X32)\Video\AVI64 x64:(x64)\Video\AVI64 | SuspendDiskSizeUpdate | 0, 1 | 0 | 4.10.5 and later | When the export period is being set, the key disables the automatic loading of indexes until the date/time control focus is removed. 0 - the indexes are loaded automatically. 1 - the indexes are not loaded until the focus is removed from the date/time controls. |
| x32: (x32)\Video\AviExport x64: (x64)\Video\AviExport | ExportDir | Path to a folder | C:\export | 4.10.0 | Specifies the directory for saving recordings exported via AviExport (Background export). |
| х32: (X32)\Video\AviExport x64: (x64)\Video\AviExport | UseTempDir | Path to a folder | - | from 4.10.5 | Specifies the path to the folder for storing temporary files created during export. To enable the use of this key, set the TempDirByDst key to 0 (see below). By default, temporary files are saved in the folder specified by the ExportDir registry key (in the AviExport section, see above) Note. It is recommended to enable the UseTempDir key for export to removable media or network drives. In this case, set the directory on the computer hard disk in the key. |
| х32: (X32)\Video\AviExport x64: (x64)\Video\AviExport | TempDirByDst | 0, 1 | 1 | from 4.10.5 | Enables the use of the UseTempDir key (see above). 0 – temporary export files are stored in the UseTempDir path. 1 – temporary export files are stored in the ExportDir path (specified in the AviExport section, see above). |
| x32: (x32)\Video\AviExport x64: (x64)\Video\AviExport | SimpleDlgModeLock | 0, 1 | 0 | from 4.10.5 | The key prohibits the change of the AviExport utility display mode. Before using the key, set the AviExport utility window to the required display mode (extended or basic), shut the Intellect down, then set the key value to 1. As a result, the mode switch button becomes unavailable. |
ECHD | |||||
|---|---|---|---|---|---|
| Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
| x32: (x32)\WebServer\ECHD\ x64: (x64)\WebServer\ECHD\ | ExportContainerFormat | mp4, avi, flv, mov, asf | mp4 | 4.10.1 and later | The key sets data format for archive export using Intellect HTTP API commands – see Archive export. |
| x32: (x32)\WebServer\ECHD\ x64: (x64)\WebServer\ECHD\ | AdditionalVersionString | Latin, Cyrillic, digits | - | 4.10.5 | The key sets the prefix for the Intellect version that is returned on the "getdeviceinfo" request via the HTTP API in the "firmware version" field. |
| x32: (x32)\WebServer\ECHD\ x64: (x64)\WebServer\ECHD\ | ReplacePointAndClick | 0, 1 | 0 | 4.10.5 | The key is designed for PTZ ONVIF-connected camera control with the degreesmove2 command (see Video surveillance device features management). |
| х32: (х32)\WebServer\ x64: (х64)\WebServer\ | TelemetryCommandMoveTimeout | >=0 | - | 4.10.5 | Sets the delay between camera panning/tilting and zooming when controlled using the degreesmove2 command given that camera supports Point&Click (see Video surveillance device features management). |
Intercom subsystem | |||||
|---|---|---|---|---|---|
| Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
| х32: (х32)\MonitoringCenter\ x64: (х64)\MonitoringCenter\ | DefaultButtonWidth | >0 | 100 | 4.10.4 and later | The key sets the width of buttons (in pixels) of the Monitoring Center. The button position is changed automatically when the values are changed. |
| х32: (х32)\MonitoringCenter\ x64: (х64)\MonitoringCenter\ | DefaultRowHeight | >0 | 70 | 4.10.4 and later | The key sets the height of buttons (in pixels) of the Monitoring Center. The button position is changed automatically when the values are changed. |
| х32: (х32)\MonitoringCenter\ x64: (х64)\MonitoringCenter\ | ButtonFontHeight | Integer numbers | -11 | 4.10.4 and later | Sets font size for buttons of the Monitoring Center. |
| х32: (х32)\MonitoringCenter\ x64: (х64)\MonitoringCenter\ | clrButtonAccept | Color designation in #RRGGBB format | #FFFFFF | 4.10.4 and later | Sets the text font for the Accept button of the Monitoring Center as #RRGGBB. For example, #FFFFFF (default) is white, #00FF00 is green. |
| х32: (х32)\MonitoringCenter\ x64: (х64)\MonitoringCenter\ | clrButtonClose | Color designation in #RRGGBB format | #FFFFFF | 4.10.4 and later | Sets the text font for the Close button of the Monitoring Center as #RRGGBB. For example, #FFFFFF (default) is white, #00FF00 is green. |
| х32: (х32)\MonitoringCenter\ x64: (х64)\MonitoringCenter\ | CancelByServerEnable | >=0 | - | 4.10.4 and later | The key enables forced connection closure after the call is completed from the device web-interface. It is used in cases when, for example, there are errors in the protocol or connection problems, the command to close the call in the Monitoring Center may not come. 0 – forced connection closure is disabled. >0 – forced connection closure is enabled. |
Differences between VideoIQ7 and Intellect | |||||
|---|---|---|---|---|---|
| Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (x32)\Video\Defragmentation | IntervalMinutes | > = 0 | 60 | 1.0.2 and later | Sets interval (min) between iterations of disk defragmentation. |
x32: (x32)\Video\Defragmentation | IntervalOnStartMinutes | > = 0 | 60 | 1.0.2 and later | Sets interval (min) from system start to the first iteration of disk defragmentation. |
x32: (x32)\Video\Defragmentation | MaxFileFragmentsAllowed | > = 0 | 10 | 1.0.2 and later | Defines the *.db3 file fragmentation threshold on the disk. It is calculated as a sum of fragments of idx.db3 and detectorevent.db3 files (log file is not taken into account). If after *.db3 files defragmentation the total number of fragments on the disk is greater than the threshold value, then the disk is defragmented. |
x32: (x32)\Video\Defragmentation | ModeForFull | 0 - 10 | 4 | 1.0.4 and later | Sets the mode to defragment files with *.db3 mask. |
x32: (x32)\Video\Defragmentation | Mode | 0-10 | 2 | 1.0.4 and later | 0 - Analyze only, do not defragment or optimize. |
x32: (x32)\Video\Defragmentation | ModeForPartial | 0-10 | 3 | 1.0.4 and later | Sets the mode in which disk defragmentation starts. |
x32: (x32)\Video\Defragmentation | FreeSpace | 0 - 10 | 1 | 1.0.4 | Sets free space on the disk (% from the total space). |
x32: (x32)\Video\Defragmentation | Speed | 0 - 100 | 3 | 1.0.4 and later | Sets the defragmentation speed (%). |
x32: (x32)\Video\Defragmentation | ThreadPriority | 0 - THREAD_PRIORITY_LOWEST | 0 | 1.0.4 and later | Sets the defragmentation priority. |
x32: (x32)\Debug | Module name | - | - | 1.0.4 and later | Specifies the module for which messages will be filtered in the log file. For instance, if log files are to be filtered for video.exe process, then the folder is to have SOFTWARE\ITV\INTELLECT\Debug\ video.exe name. |
x32: (x32)\Debug | Filter | Text | - | 1.0.4 and later | Specifies an alphabetic word or word-combination that is to be in the message. |
x32: (x32)\LMCGate | SmartSearch | 0, 1 | 1 | up to 4.8.0 | Defines whether forensic search is enabled or disabled: |
x32: (x32)\Video | scene | 0, 1 | 1 | 1.0.5 SP1 | Defines whether there is a scene in the configuration. |
x32: (x32)\Video | momentquest | 0, 1 | 1 | 1.0.5 SP1 | MomentQuest application (0 – feature is disabled). |
Overview
Content Tools