Previous page
Next page
To configure object tracker, do as follows:
- Select the Object tracker object.
Configure parameters.
Parameter Description Enable Enable/disable detection tool. Record object tracking If you need to enable recording of metadata, activate this parameter. Auto Sensitivity If you require automatic adjustment of the sensitivity of scene analytic detection tools, activate this parameter. Camera position Еo reduce false alarms rate from a fish-eye camera, you have to position it properly. For other devices, this parameter is not valid. Decoder mode Select a processing resource for decoding video streams. When you select a GPU, a stand-alone graphics card takes priority (when decoding with NVidia NVDEC chips). If there's no appropriate GPU, the decoding will use the Intel Quick Sync Video technology. Otherwise, CPU resources will be used for decoding.
Max. Object height
Max. Object width
Maximum height and width of a detectable object as a percent of the FoV height. The values should be in the range [0,05; 100]. Min. Object height
Min. Object width
Minimum height and width of a detectable object as a percent of the FoV height. The values should be in the range [0,05; 100]. Motion detection sensitivity Set the sensitivity for motion detection tools, on a scale of 1 to 100. Frame size change Analyzed framed are scaled down to a specified resolution (8, 1280 pixels on the longer side). This is how it works:
If the longer side of the source image exceeds the value specified in the Frame size change field, it is divided by two.
If the resulting resolution falls below the specified value, it is used further.
If the resulting resolution still exceeds the specified limit, it is divided by two, etc.
Antishaker To correct for camera shake, activate this parameter. This setting is recommended only for cameras that show clear signs of shaking-related image degradation. Time of Object in DB Enter the time interval in seconds, during which object's properties will be stored. If the object leaves and enters the FoV within the specified time, it will be identified as one and the same object (same ID). Object calibration Activare, if you want to configure the perspective. Leveling rod height Enter the height in decimeters of the object you want to find. Enable filter If necessary, configure the neural network filter. The neural network filter processes the results of the tracker and filters out false alarms on complex video images (foliage, glare, etc.). Moving object filter mode Select the processor for the neural network — CPU, one of GPUs or a IntelNCS Abandoned object filter mode Select the processor for the neural network — CPU, one of GPUs or a IntelNCS. Moving object filter file Select a neural network for analyzing moving objects.
A neural network filter can be used either only for analyzing moving objects, or only for analyzing abandoned objects. You cannot operate two neural networks simultaneously.
Abandoned object filter file Select a neural network for analyzing abandoned objects. By default, the entire FoV is a scene analytics zone. If you need to exclude parts of the scene prone to false alarms from detection (leaves, water, etc.), you should set privacy masks − zone with scene analytics and metadata generation disabled. To do so, follow the steps:
- Click
against the object tracker. - Select Add device.
- Select VisualElement.
- Select the VisualElement object.
- Choose Skip area in the list.
- In the FoV, set the nodes of the closed area, in order, inside of which you want no detection.
- To select the area, move the intersection points
.
- Click
- Click
to save changes.
The detection tool is now configured.