SIP Panel

On this page:

Purpose

SIP-panel is designed for making calls to numbers from the address book and/or to numbers within the distributed system configuration of the system.

Features

SIP Panel provides the following functions:

Making single and group calls between operators and/or SIP-devices.
Viewing the log of calls received or made using the SIP-panel.
Viewing and/or listening to archived calls received or made using the SIP-panel.

Interface description

By default, all elements are displayed in the SIP Panel interface. If necessary, some interface elements can be disabled (see Advanced settings of the SIP-panel interface object). Below is an example when all interface elements are displayed.

The SIP Panel interface consists of two tabs. The Call tab allows receiving and making calls. The Archive tab lists the incoming and outcoming calls and allows the audio and/or playback of the archived calls with the corresponding controls.

Depending on the operator's Default settings, you may need to log in in the SIP-operator authorization window when you first log into the SIP-panel.

Note

The Call and Archive tabs will not be available until the SIP-operator is authorized.

SIP-operator authorization window

The SIP-operator authorization window contains a list of available SIP-operators (see Operator settings of the SIP-panel interface object). For authorization, you need to double-click the SIP-operator under which you will be logged in. The number of the current SIP-operator will be displayed in the upper right corner of the SIP-panel.

If a SIP-operator is already authorized in any SIP-panel, then this operator will be highlighted in red in other SIP-panels. You cannot log in under an already authorized SIP-operator.

After rebooting the Server/Remote Client, the previously authorized SIP-operator will be logged in automatically. If you log off the current user in Axxon PSIM and log in again as the same user, you will need to be authorized again.

Note

The authorization window may open also in the following cases:

If during the Server/Remote Client reboot, the same SIP-operator was logged in on another Server/Remote Client.
If the User rights mode is selected and the current registered Axxon PSIM user does not correspond to this mode (see Operator settings of the SIP-panel interface object).

If, while working with the SIP-panel, you need to log out of the current SIP-operator without unloading the Server/Remote Client, then click on the operator number in the upper right corner.

The Call tab

The interface of the Call tab of the SIP Panel is shown in the figure:

The top of the Call tab displays the subscriber numbers from the address books added to the current SIP-operator during the SIP-terminal configuration stage. If the same subscriber number is added to several address books, then only one will be displayed on the SIP-panel.

Note

If the SIP-terminal was not specified at the SIP-panel configuration stage (see Basic settings of the SIP-panel interface object), then the subscriber numbers from the address books will not be displayed.

A dial pad is available in the middle of the window. For more information on dialing and making a call, see Making calls using SIP Panel.

The Archive tab

The interface of the Archive tab of the SIP Panel is shown in the figure:

To ensure the correct playback of archived calls, it is necessary to configure the audio and video archiving (see Configuring video archiving and Configuring audio signals recording).

The table includes the following information:

Column	Description
Type	Call type: incoming or outcoming
Subscriber	The subscriber number
Name	The subscriber name
Date and time	The call start and end time. Note. The group calls are shown as several calls to different numbers at the same time (see Configuring numbers of SIP-terminal for details on group calls configuration).
Duration	The call duration

Note

Left-click on a column name to sort the information in ascending/descending order of the values of the corresponding column.

Video and/or sound are played back when playing the archived call depending on whether the subscriber (SIP-operator or SIP-device) has camera and/or microphone configured. The operator's speaker (see Selecting speaker, microphone and camera for SIP-operator) is utilized for audio playback and the Monitor selected while configuring the SIP Panel (see Configuring the SIP-panel interface object) is used to playback video.

Controls for playing archived calls are under the table:

Update the call list