Go to documentation repository
Note.
This document describes the older version of SIP protocol integration. Please refer to Configuring SIP-terminal section in the Administrator's Guide for the most relevant information about SIP devices configuration and operation.
Intercom Subsystem Reference and Information Guide. Introduction
Configuration of the Intercom subsystem
- Configuration of the SIP-device
- Configuration of the Intercom Subsystem of security intercom terminals
- Select disks for storing the archive of audio and video subsystem of security intercom terminals
- Configuration of SIP-devices in the Axxon PSIM software
- Configuring SIP devices with streaming video over RTSP to Axxon PSIM
- Configuring the Video capture device object corresponding to a SIP device with streaming video over RTSP
- Configuring SIP device sensor with streaming video over RTSP protocol to Axxon PSIM
- Configure SIP device relay with streaming video over RTSP protocol to Axxon PSIM
- Configuring audio subsystem of SIP device with streaming video over RTSP protocol to Axxon PSIM
- Configuring SIP device camera with streaming video over RTSP protocol to Axxon PSIM
- Configuration of the security intercom terminals video subsystem in the Axxon PSIM software
- Configuration of the security intercom terminals monitoring in the Axxon PSIM software
- The Client configuration (operator workstation)
Working with the Intercom Subsystem
- Calls acceptance
- Viewing the video image from video camera of security intercom terminal
- Modes of call processing
- Call of the SIP-device using the Video surveillance monitor
- Reports log
Intercom Subsystem Reference and Information Guide. Conclusion
Appendix. Hot keys at keyboard control
Overview
Content Tools